Touch screen melt flow rate tester

Product Introduction:

• Equipment usage:

Melt flow apparatus is an extrusion plasticity apparatus operated under given temperature and pressure conditions, consisting of a material cylinder, piston, orifice film, heating furnace, temperature measurement system, temperature control system, loading device, and cutting device. Can be used for polyethylene, polypropylene ABS 、 Determination of melt flow rate of various plastics such as polyamide, fiber resin, polyoxymethylene, fluoroplastics, polycarbonate, etc.

The RZY-400A series dissolution flow meter developed by our company integrates mass method and volume method. Adopting an embedded control system, users can operate files or data through a touch screen, and the setting and control of the test temperature are also completed by an all-in-one machine, eliminating the need to operate the temperature control meter and truly achieving human-machine dialogue. In addition, this instrument adopts an intelligent dual display temperature control meter with high temperature control accuracy and good stability. All parameters of the instrument comply with the provisions of relevant standards such as GB3682-2000 and ISO 1133:1997.

※ Touch screen operation, voice prompts, easy to operate.

The experimental data can be stored on the USB drive equipped with the device.

2、 Main technical indicators:

1. Inner diameter of barrel: 9.55 ± 0.025mm
2. Piston head diameter: 9.475 ± 0.015mm
3. Piston head length: 6.35 ± 0.1mm
4. Diameter of extrusion hole for oral film: 2.095 ± 0.005mm
5. Temperature control range: 80 ℃ -400 ℃
6. Temperature control accuracy: ± 0.2 ℃
7. Display resolution: 0.1 ℃
8. Weight accuracy: ± 0.5%
9. Basic weight configuration: A 0.325 kg (including pressure rod)

B 0.875 kg

C 0.960 kg

D 1.200 kg

E 1.640 kg

1. Cutting frequency: 0-10 times (adjustable)
2. Cutting time interval: 0-999S (adjustable)
3. Material barrel constant temperature time: 900S (adjustable)
4. Sample heating time: 240S (adjustable)

3、 Standard configuration: