Three phase stepper motor driver MA3206

MA-3206 is a three-phase stepper motor driver based on DSP control. It is a new generation digital stepper motor driver that combines advanced DSP control chips and three-phase inverter drive modules. The driving voltage is AC110V-220V, suitable for various models of three-phase hybrid stepper motors with currents below 5.8A (7.0A) and outer diameters of 57-130mm. The driver adopts a circuit similar to servo control principle internally, which can make the motor run smoothly with almost no vibration and noise. At high speed, the torque of the motor is much higher than that of the two-phase and five phase hybrid stepper motors. The positioning accuracy can reach up to 60000 steps per revolution. This product is widely used in high resolution large and medium-sized CNC equipment such as carving machines, medium-sized CNC machine tools, computerized embroidery machines, packaging machinery, etc. L High performance, low price l Equipped with 16 levels of equal angle constant torque subdivision, with a maximum resolution of 60000 steps per revolution l The highest response frequency can reach 200Kpps l When the step pulse stops for more than 1.5 seconds, the coil current automatically decreases to half of the set current l Optoelectronic isolation signal input/output

■stepping motor driverMA3206characteristic

■stepping motor driverMA3206performance index

MA3206For specific usage, please refer to the download manual on the right