Thin film impact tester

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The film impact tester is used to determine the impact toughness of metal film materials such as plastic and rubber, as well as metal foil materials. Working conditions of the sample: The sample is at a temperature of 23amp; amp; amp; plusmn; Place in an environment with a temperature of 2 ℃ and a relative humidity of 45% to 55% for at least 4 hours, and conduct the test in this environment.

Product Details

1Thin film impact testerBasic principle: A hemispherical punch is used to impact and pass through a thin film sample at a certain speed, and the energy consumed by the punch is measured to evaluate the anti pendulum impact energy of the thin film sample.

IIThin film impact testerEquipment use: Used to measure the impact toughness of metal film materials such as plastics and rubber, as well as metal foil materials. Working conditions of the sample: The sample shall be placed in an environment with a temperature of 23 ± 2 ℃ and a relative humidity of 45% to 55% for at least 4 hours, and the test shall be conducted in this environment.

3、 Main technical indicators:

1. Maximum impact energy: 3J

2. Sample size: 100mm × 100mm

3. Sample clamp diameter: Φ 89, Φ 60, Φ 50

4. Punch size: Φ 25.4mm, Φ 12.7mm

5. Swing range: R300mm

6. Swing angle: 90 °

4、 Installation and operation instructions:

After unpacking, place the testing machine on a sturdy and appropriately high table, find it level, and soak it horizontally in the center of the table. Adjust the active and passive aiming at the 3J engraving line. Choose the sample clamp and punch according to the test requirements, place the sample flat into the clamp, clamp the sample, and there should be no wrinkles or excessive tension around the sample. The impact surface of 10 samples should be *. Hang the pendulum rod onto the hook, quickly release the hook to allow the pendulum to impact the sample, record the reading, make 10 samples as described above, test the arithmetic mean of the 10 samples, write a test report, and complete all tests.

Product keywords: film impact testing machine; Impact testing machine; to attack; Plastic film anti pendulum impact tester

Related product links:

Plastic ball indentation hardness tester	Microcomputer controlled electronic universal testing machine	Hot deformation Vicat temperature tester	Cantilever beam mechanical impact testing machine
Microcomputer controlled dart impact testing machine	Falling ball impact tester	Drop hammer impact testing machine	Microcomputer controlled voltage breakdown tester
Hydraulic universal testing machine	Melt flow rate tester	Film processor	Notch prototype
Thin film impact testing machine	Microcomputer controlled electronic tensile testing machine	Dart impact testing machine	Mechanical simply supported beam impact testing machine
Mechanical simple suspension combined impact testing machine	Microcomputer controlled electronic bending testing machine	Microcomputer controlled memory impact testing machine	Microcomputer controlled electronic universal testing machine
LCD simply supported beam impact testing machine	Liquid crystal simple suspension impact testing machine	Microcomputer mobile phone tensile and compressive testing machine	Liquid crystal simple suspension impact testing machine
Microcomputer controlled electronic tensile testing machine	Microcomputer controlled drop hammer impact testing machine	Microcomputer controlled thin film impact testing machine	Universal prototype machine
Thermal deformation Vicat Martin heat resistance tester	Microcomputer controlled Martin heat resistance tester	Plastic ball indentation hardness tester