TZFB Strong Self priming Pump

The TZFB produced by our factory-IIIThe type of strong self-priming metal axial chemical pump can meet the transportation of corrosive liquids and slurries with suspended particles and certain viscosity in the process flow. It is a single-stage single suction cantilever centrifugal pump. This strong self-priming pump is widely used in industries such as petrochemicals, rare earth smelting, electricity, desulfurization and dust removal, and environmental protection.

1Characteristics of Strong Self priming Pump:

1. When starting, there is no need for backflow, vacuum pump, or bottom valve. The pump itself can automatically extract air and liquid.
2. The self-priming height can reach 9m, breaking the limit of the pump's "allowable suction height".
3. The self-priming time is short, ranging from 6.3m3/h to 600 m3/h, with a self-priming time of only 6-50 seconds.
4. The unique suction device maintains an approximate vacuum state between the liquid level and the impeller, improving the efficiency of the pump.
5. During the operation of the pump, even if there is a "water loss" phenomenon, it can automatically extract air through the suction device, achieving the effect of cutting off and restoring at any time.
6. Product Material: A3、HT200、1Cr18Ni9Ti、1 Cr18Ni12Mo2Ti、 American standard 316, 316L, Japanese standard SUS304 SUS304L、 Monel, Hastelloy, heat-resistant and corrosion-resistant alloys.

Not the product you want? Click here to return to the previous page】

IIModel Description：

For example: TZFB-III-50-32
TZFB stands for Strong Self Absorption
III represents metal axial imported chemical pump
50 represents the import diameter (mm)

32 represents head (m)

3、 Schematic diagram of TZFB strong self-priming pump structure

4、 Photo of on-site use of TZFB strong self-priming pump

5Performance parameters of TZFB strong self-priming pump