Stainless steel three temperature and three control water bath

DK-8BStainless steel three temperature and three control water bathProduct Features:

① The box is made of SUS304, stamped with molds, with curved corners, no welding, synthesized in one gas, and has rust prevention ability.

② The studio is made of SUS304 stainless steel plate, with rounded corners, smooth, fluent, and easy to clean.

③ Using steel and brass pipes as heat sensing elements, installed under the partition of the box, directly immersed in water for fast heat transfer and high sensitivity.

④ The electric heating tube is made of U-shaped steel pipe, sintered magnesium oxide and electric heating wire, and directly immersed in water with less heat loss.

⑤ The outlet pipe is an extension type, which is beautiful, convenient, and durable.

⑥ The temperature control is manufactured using microcomputer intelligent digital technology, with industrial PID self-tuning and LED window indication functions. It has high temperature control accuracy, strong anti-interference ability, and easy operation.

⑦ There are three sets of water tanks and corresponding temperature control devices, which can be set for temperature and temperature control respectively.

⑧ The temperature control device adopts stable operational amplifiers and dual integration high-precision A/D conversion technology: designed with infrared heating technology, the product has a short thermal equilibrium time, small temperature fluctuations, good uniformity, and accurate and intuitive LED display.

⑨ It has the advantages of high temperature control accuracy, strong corrosion resistance, compact structure, energy saving, and long service life.

DK-8BStainless steel three temperature and three control water bathMain technical parameters:

Box material: SUS304 inside and outside

Power supply: 220V 50HZ

Heating power: 3 * 300W

Temperature control range: RT-100 ℃

Water temperature fluctuation: ≤ 0.5 ℃;

Temperature control accuracy: ≤ 1 ℃

Working volume: Each hole: 155mm × 160mm × 140mm

This product is a new type of water bath pot newly launched by our company, with three sets of water tanks and corresponding temperature control devices, which can be set to mild and temperature control respectively. The inner and outer bodies of the water bath pot are all made of authentic 304 series stainless steel. The inner pot of the water bath pot is stamped with arc-shaped rounded corners, without welding, and synthesized in one gas. It has good rust prevention ability and can be used for constant temperature heating and other temperature tests in water baths.

Precautions for use:

1. This product uses a 220V AC power supply, and the power socket should use a three hole safety socket, which must be properly grounded.

2. Before powering on, water should be injected into the pot above the partition. During use, the heating tube should not be exposed to the water surface, otherwise the heating tube will burn or even burst, or the solder will melt and leak water, causing electric shock, etc.

3. Connect the power supply, display through the temperature control meter, and operate according to the product manual. This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge shows the actual temperature inside the pot.

4. When using 100 ℃ boiling water distillation, do not add too much water to prevent overflow during boiling.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to inquire.