Spray drying production line

NegotiableUpdate on 01/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Spray drying production line technology: hot air enters the drying tower, and the feed liquid (solution, emulsion, suspension, paste liquid) is sent to the spray installed in the drying tower. The fog drops are dried quickly in the hot gas flow for several seconds. The solid is collected as the finished product, and the gas is discharged. Scope of application: Typically, powder products with an average size of 80-500 mesh are obtained from liquid raw materials, while agglomerated instant products with a size of 20-100 mesh are obtained.

Product Details

　　Spray drying production lineTechnology: The hot air enters the drying tower, and the feed liquid (solution, emulsion, suspension, paste) is sent to the spray installed in the drying tower. The fog drops are dried quickly in the hot gas flow for several seconds. The solid is collected as the finished product, and the gas is discharged.

　　Spray drying production lineScope of application: Powder products with an average of 80-500 mesh are usually obtained from liquid raw materials, and agglomerated instant products with 20-100 mesh are obtained.

There are three basic modes of atomization: LPG centrifugal, YPG pressure and QPG air flow. Fluidized bed, built-in granulation fluidized bed and air flow cooling can be configured below the spray tower; By installing energy-saving and environmental protection devices at the exhaust outlet of the spray tower, as well as an imported hot water energy utilization device, energy-saving and environmental protection effects can be achieved, achieving a level of energy savings of 20-40%. Safe, stable, and of high product quality.