Soil grinder JX-0.4L

Soil grinderIt is an essential device for mixing, fine grinding, sample preparation, dispersion of nanomaterials, development of new products, and small-scale production of high-tech materials. This product has a small volume, comprehensive functions, high efficiency, and low noise. It is an ideal equipment for scientific research institutions, universities, and enterprise laboratories to obtain micro particle research samples (four samples can be obtained at the same time in each experiment). Equipped with a vacuum ball milling tank, the sample can be ground under vacuum.

Used for rapid batch grinding of research samples to a gelatinous fineness (as small as 0.1 μ m) in higher and vocational colleges, research institutions, and enterprise laboratories, and for mixing, homogenization, and dispersion; Widely used in scientific research and industry sectors such as soil, geology, minerals, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, beauty, environmental protection, etc; Suitable for soil, electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganese oxide, catalysts, phosphors, long afterglow luminescent powders, rare earth polishing powders, electronic glass powders, fuel cells, zinc oxide varistors, piezoelectric ceramics, nanomaterials, circular ceramic capacitors MLCC、 The production field of thermistors (PTC, NTC), ZnO varistors, dielectric ceramics, alumina ceramics, zirconia ceramics, phosphors, zinc oxide powder, cobalt oxide powder, Ni Zn ferrite, Mn Zn ferrite and other products.

A soil grinder is equipped with four ball milling tanks on the same turntable. When the turntable rotates, the ball milling tanks revolve around the turntable axis while also rotating around their own axis, performing a planetary motion. The grinding balls in the tank collide with each other in high-speed motion, grinding and mixing samples. This product can be ground and mixed with different particle sizes and materials using both dry and wet methods. The smaller particle size of the ground product can reach 0.1 microns (i.e. 1.0 × 10mm-4). Working mode: Two or four ball milling tanks work simultaneously. Large sample size: two-thirds of the capacity of the ball milling tank. Feed tensile strength: soil material ≤ 10mm, other materials ≤ 3mm. Discharge particle size: smaller, up to 0.1um (i.e. 1.0 × 10mm-4).