Six hole water bath magnetic stirrer

HH-6JSix hole water bath magnetic stirrerThe design is reasonable, the structure is novel, there is no speed regulation, and the heating temperature can be displayed digitally. It is a new product combining water bath and magnetic stirrer, with two functions of water bath heating and magnetic stirring, suitable for stirring various liquids with requirements for stirring speed and temperature.

Technical Specifications:
1. Power supply: 220V 50HZ

2. Mixing capacity: small capacity of 6 × 1000ml and below

3. Heating power: 1500W

4. Constant temperature range: room temperature -99.9 ℃

5. Temperature accuracy: ≤± 0.5 ℃

6. Rotational speed: 0-2600 revolutions per minute (adjustable and individually controllable for each workstation's mixing speed)

7. Pot size: 450 × 300 × 120mm

8. Temperature control method: PID, LED digital display, button based temperature setting

9. Pot body material: stainless steel

HH-6JSix hole water bath magnetic stirrerProduct Features:
1. The inner liner is made of stainless steel, which has excellent corrosion resistance.
2. The intelligent temperature controller has high temperature control accuracy, can set temperature and temperature display, automatic temperature control, and intuitive and accurate digital display.
3. Stepless speed regulation, stable rotation speed, and the ability to independently control the mixing speed of each workstation.
4. It can simultaneously heat and stir 6 samples at a constant temperature, saving time and increasing efficiency.
5. The stirrer made of refined polytetrafluoroethylene and magnetic steel is resistant to high temperature, wear, chemical corrosion, and strong magnetism. It can perform precise and stable constant temperature stirring and mixing of liquid solutions in closed containers over a wide speed range.

Product usage instructions:

1. Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there is any poor connection or short circuit in the power supply, plug, and grounding. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature sensitivity.

2. When using, water must be added to the pot first, and then the power supply must be turned on. The digital temperature control meter displays the actual measured temperature. Set the desired temperature according to the instrument manual, and observe the reading until it reaches the desired set temperature value. When the set temperature value exceeds the temperature of the water, the heating indicator light will turn on, indicating that the heater has started working. When the temperature of the water reaches the desired temperature, the constant temperature indicator light will turn on and the heating indicator light will turn off.

3. It should be noted that the water in the pot should not expose the electric heating tube to the water surface, in order to avoid burning out the electric heating tube and causing leakage.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and wholeheartedly serve people from all walks of life throughout the entire process. Thank you for your attention! Welcome to inquire.