-
Phone
13701268558
-
Address
Room 107, Building 5, Zhongke Keyi Building, No. 13 Zhongguancun North Second Street, Haidian District, Beijing
Product Categories
Dechuangke Instrument (Beijing) Technology Co., Ltd
Sectional image analyzer
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
-Simultaneously displaying two samples for convenient sample analysis operation
Product Details
- Purpose: DWTT sample section analysis device
- Sample type: DWTT, Charpy Impact sample
- Number of shots taken: 1 set (2 photos)
- Resolution: up to 1800M pixels
- Data saving: Excel file output, image saving
- Power supply: 22V 60Hz single-phase
Product Introduction
This product is designed for testing samples DWIT After the experiment , Equipment for graphic analysis of fractured specimen surfaces . have answer Automatic imaging of the two sides of the sample after fracture , Send to computer , The function of using a computer to conduct cross-sectional analysis and obtain conclusions for saving .
Product Features
-A DSLR camera with 18 million pixels captures clear images
-Simultaneously displaying two samples for convenient sample analysis operation
-Simply select the cross-section to calculate and automatically analyze the surface area of the sample
-Convenient and fast shooting and adjustment keys
-Using a precise displacement controller to automatically adjust the shooting position based on the thickness of the sample
stepping motor
-Closed loop control of 32-bit DSP
-With the addition of sample placement quantity, up to 16 axis control functions can be performed
-Rotation angle resolution: up to 32000 pulses per revolution
-Error display and protection functions such as overcurrent abnormality and overspeed abnormality
-RS-485 communication interface
-Communication speed: 9600 bps~921600 bps Adjustable
-18 I/O port controls (computer control required)
-3 H/W limit detection functions (can detect the loss of upper controller function)
-256 step self programming operation function
camera
-Single lens reflex (AE/AF) with built-in flash
-Image sensor size: 22.3mm x 14.9mm
-Do not use ordinary lens products such as cameras, camshafts, surveillance cameras, etc
-To obtain clear images, the lens needs to be replaceable according to the size of the sample
-Image sensor type: CMOS sensor
-Effective pixels: approximately 18 million pixels
-Record pixels: maximum 5184 x 3456, minimum 720 x 480
-White balance: automatic, preset, user-defined
-Noise reduction function
-Automatic brightness optimization function
-Auto focus: TTL secondary imaging phase difference detection method
-AF point illumination: 9
-Metering range: EV -0.5~18
-Focus mode: Auto focus, manual focus mode
-ISO sensitivity: 100~6400 configuration
-Shutter: Electronic controlled focal plane shutter
-Shutter speed: 1/4000 seconds~30 seconds, Bulb shutter function technology
-Continuous shooting: fastest 3.7 frames per second
-Maximum number of consecutive shots: about 34
-Power supply: 220V AC (normal power supply, non replaceable battery)
Supply
| Voltage/Frequency | 220~240V / 50~60Hz |
|---|---|
| Power inlet | 1Phase |
| Power capacity | 500W |
| Current. max. | 2.5A |
Dimension and weight
| Width | 370mm |
|---|---|
| Depth | 665mm |
| Height | 960mm |
