Rail type wireless temperature measurement receiving terminal HYTR-D

Wireless temperature measurement devices can work in complex electromagnetic environments, high temperature environments (125 degrees Celsius), humid environments, and corrosive environments. The wireless temperature measurement receiving terminal can be divided into various forms such as wall mounted, rail mounted, panel mounted, etc. according to the installation method. Based on the on-site situation of the distribution operation and maintenance renovation project, it is recommended to use a rail type wireless temperature measurement receiver, namely HYTR-D type. The receiving terminal is responsible for receiving the temperature measurement results from the temperature sensor and uploading them through the RS485 bus. At the same time, another RS485 bus can be used to connect to the touch display unit for local display of temperature monitoring data.

Technical Specifications
working power supply	AC85～265V 50/60HzDC85～300V	communication interface	RS485 * 2
working environment	-20℃～+70℃ 20%～90%RH(No condensation)	communication protocol	Modbus (customizable)
Storage temperature	-40℃～+80℃	Baud rate	1200-19200bps， Default 9600
Wireless transmission power	13dbm	power consumption	＜3W
Wireless sensitivity	-110dbm	Insulation strength	4kV (test voltage is AC RMS)
Installation method	Standard 35mm rail installation	insulation resistance	＞5MΩ