-
Phone
18911231089
- Address
Product Categories
Beijing Hengaode Instrument Co., Ltd
Power Remote Control Comprehensive Tester/Power Simulation/Data Tester/Power Remote Control Channel Tester
NegotiableUpdate on 10/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Detailed instruction manual
Product Details
Power Remote Control Comprehensive Tester/Power Simulation/Data Tester/Power Remote Control Channel TesterHAD-4055/H141266
Detailed instruction manual
The power remote control comprehensive tester is suitable for engineering construction, engineering acceptance, and daily maintenance testing of power systems. Its performance is reliable and stable, with complete functions and a compact size. It adopts a large screen Chinese display, and the operation is simple and easy.
1.1 FunctionInstructions
Users follow the power system's requirements for remote control signals（The standard for the baud rate and center frequency of FSK modulation transmission is used to send FSK signals with different baud rates from the instrument to the four wire channel. The instrument can detect the error rate of the four wire analog channel through measurement and environmental testing methods, or detect the reception of FSK signals through the monitoring system of remote control equipment. In addition, the instrument can automatically detect the baud rate of the received FSK analog modulation signal.
1.2 Technical indicators
|
project |
Instructions |
|
working mode |
4-wire transparent mode, full duplex |
|
modulation scheme |
2FSK (Frequency Shift Keying) |
|
transmission mode |
Synchronous and asynchronous |
|
loop impedance |
600ΩBalance |
|
Data rate |
300b/s、600b/s、1200b/s |
|
center frequency |
1320、1500、1700、1800、2760、2880、3000Hz |
|
Modulation frequency offset |
±150±200±240Hz、±400Hz、±500Hz、±600Hz |
|
Test pattern |
220-1、215-1、211-1. 29-1、26-1 pseudorandomcode、 All "1" codes, all "0" codes, and16 bit manual code |
|
Pattern polarity |
ITU-T normal, ITU-T reversed |
|
Send clock |
Internally generated |
|
Receive clock |
Interface extraction |
|
Error insertion |
Single bit error, ratio bit error10-2, 10-3, 10-4, 10-510-6, 10-7 |
|
Receiving level |
-30 ~+20dBm |
|
output level |
-10 ~+5dBm |
|
meet the standard |
Standards issued by the Ministry of Electric Power V.23、u-4f、SCI、CDT、ABB |
|
compatibility |
The center frequency point and modulation frequency offset can be arbitrarily changed according to the user's needs |
Similar Product Recommend
