Powder density tester

Powder density refers to the mass corresponding to a unit volume of powder. Due to the presence of voids (or pores) between particles or within particles in the powder, the density of the powder is usually lower than the true density of the corresponding substance. Powder density can be divided into bulk density (also known as bulk density) and tap density according to different testing methods. Loose density refers to the loose state of a powder sample, which is uniformly and continuously filled with a known volume of measuring cup. By weighing the mass of the measuring cup and the powder sample, the loose density of the powder sample can be calculated. The compacted density refers to the density of the powder contained in a container after being compacted under specified conditions.

HR—D3 型Powder density testerIt is based on our companyNational standard GB/T 5162-2006/ISO3953:1993（The determination of the compacted density of metal powder is conducted using a powder density testing instrument independently developed and manufactured according to the United States Pharmacopeia, which has independent intellectual property rights. The instrument includes all indicators specified in the national standard GB/T 5162-2006/ISO3953:1993.

HR—D3 型Powder density testerIt consists of components such as a variable speed motor, vibration components, microcomputer, and micro printer. And the instrument has the characteristics of compact structure, firmness, and simple operation.

Technical Specifications：

• Sample weight: ≤ 500.00 grams；
• Sample volume: ≤ 250.00 milliliters；
• Single vibration frequency: 0 to 99999 times (when set to 0 times, the result output is "loose packing density");
• Allowable torque of motor: 0.86 N.m；
• Vibration frequency: 0-300 revolutions per minute (continuously adjustable);
• Vibration amplitude: 3mm (national standard)
• Repetitive error: ≤ 1%；
• Accuracy error: ≤ 1%；

9. Input power supply: AC 220V (50Hz/60Hz), 40W.

Technical Principle:

HR-D3The series of high-precision vibration density meters are specialized measuring instruments for solid powder density, in accordance with national standards

The standard GB/T 5162-2006/ISO3953:1993 was developed and manufactured in accordance with the standards of the United States Pharmacopeia. It is widely used

In the defense industry, papermaking, cement, batteries, coatings, as well as various metal and non-metal industries.

Instrument Features

• Dust proof and waterproof facial mask, membrane button and micro LCD
• Vibration component composed of high-precision deceleration motor and speed controller
• CPU intelligent data processing part
• High resolution printer
• Accurate measurement results to 4 decimal places
• The instrument has a sturdy structure, beautiful appearance, and easy operation

Environmental Requirements

• Working power supply: AC220V ± 10V 50HZ
• Continuous working time:<8 hours
• Relative humidity: less than 85%, no condensation phenomenon
• Other requirements: The environment should be clean and free of smoke and dust, and there should be no mechanical vibration or electromagnetic interference sources around

.Basic indicators

• Vibration frequency: 100-300 times/minute (USP 300 times/minute)
• Amplitude: 3mm (National standard 3mm)
• Measurement error: Sample testing accuracy error<± 1%
• Measurement accuracy: Test results are rounded to 4 decimal places

Speed regulating motor

• Motor power40W
• Output Z high speed 290r/min
• Allowable torque 0.87Nm

Operation Method

During testing, place any amount of powder (not exceeding the Z-high mark of the measuring cylinder used) into the cylinder and keep it in place

Under the original form of the particles, the uniform reciprocating up and down linear motion of the vibration device is used to make the particle gap tend to be uniform

Limit value, until the volume of the powder no longer decreases. The mass of the powder is divided by the volume after compaction to obtain the sample

Vibration density.

Representation method:

ρ= m/v (g/cm³)

ρ: Compacted density

M: Sample quality

V: Volume of the sample after vibration compaction

Configuration and price: