Photo-DSC 204 F1 Thermal System

1、 Product Introduction:

The main advantage of UV curing system is its fast reaction time. Monomer solutions (usually without solvents) may solidify within a few seconds at low temperatures. In the field of dual curing adhesives or coatings, heat curing and light curing are often used in combination.

In response to this specific field, Nike has newly launched the Photo DSC 204 F1 Phoenix ®， Capable of working at -100 ℃ Within the temperature range of 200 ℃. The instrument has a vacuum sealed measuring unit, and the blowing gas flow rate is regulated and controlled by a built-in mass flow meter (MFC)

Photo-DSC 204 F1Can use most standard laboratory and industrial lamps for cationic or radiation curing systems.

For the analysis of adhesives, we recommend equipping withDELOLUX 04High pressure mercury lamp（315-500 nm）, can be easily accessed throughProteus ®The software triggers it.

For paint and ink applications, we recommend equipping withOmniCure S2000Light source. The relevant measurement parameters (such as irradiation time and irradiation intensity) can be obtained throughProteusSoftware programming and control, and supports multi-stage control.

OmniCure S2000The intensity of the high-pressure mercury lamp used can be measured using a radiation meterR2000Perform calibration.

DSC 204 F1 Phoenix ®The modified automatic lifting device ensures a fixed distance between the two light pipes and the sample and reference. This ensures the high repeatability of the measurement results.

For others higher than 200℃ The routineDSCAnalysis shows that standard lifting devices can be modified, or manual lifting devices can be used.

2、 Technical parameters:

*Different filters can be used for adjustment and expansion

III3 in 1 Box

new typeConcavuscrucible

The newly designed crucible has added a special reinforcing ring at the bottom to ensure that the bottom of the crucible andDSCThe stable and good thermal contact of the sensor bottom significantly improves the repeatability of the measurement results.ConcavusThe technical design of crucibles can improve all aspectsDSCDue to the repeatability of measurement, it is applicable to all heat flow models on the market, including NikeDSC.

new type3in1 Box

3in1 BoxNew models provided by NikeConcavusUsed in conjunction with crucibles. Provide comprehensive protection during the transportation and storage of crucibles. Not only that, we also offer a fully functional archiving system, which is particularly suitable for applications that require long-term preservation of samples and regular retesting.

In the past,DSCThe crucible and lid are loose in plastic boxes. There is static electricity between crucibles, which sticks together and sometimes makes it difficult to separate them. In addition, if the plastic box is accidentally covered, the crucible and lid may deform and cannot continue to be used.

The current crucible packaging makes sample preparation more efficient.3in1 BoxCan accommodate 96 Arrange the crucible and lid neatly in an anti-static plastic box. This makes it easy to remove the crucible and lid. Each box is equipped with a sample label card for easy archiving of samples and measurement results. This compact3in1 BoxEasy to store, transport, and archive crucibles and lids.

4、 Software functions:

Photo-DSC 204 F1 Phoenix ® -FUNCTION

Photo-DSC204F1 Phoenix ®The operation and analysis software is based onMS WindowsofProteusThe software package includes all necessary measurement and data analysis functions. This software package has an extremely user-friendly interface, including easy to understand menu operations and automated workflows, and is suitable for various complex analyses.ProteusThe software can be installed on the control computer of the instrument to work online, or installed on other computers for offline use.

Photo-DSC 204 F1The standard software functions andDSC 204 F1 Phoenix ®Same.

More specialized software features:

1. DELOLUX04The light source can beProteus DSCTriggering with measurement software;OmniCure S2000The light source can beProteus DSCMeasurement software is used to control and adjust the irradiation time and light intensity.
2. Each temperature range can be individually set with irradiation pulses, which can be set through the checkbox on the right side of the temperature range.
3. Calculate the effective reaction heat by subtracting the curve from the time offset.

5、 Related attachments:

For tests above room temperature, cost-effective compressed air cooling (air compressor, or laboratory unified compressed air supply) can be equipped.

As an optional solution, mechanical cooling equipment using circulating coolant can also be equipped, with a working temperature of-85 . .. 600℃Compared to compressed air cooling, it can provide faster cooling speed and shorten the measurement cycle.

We offer a variety of crucibles (aluminum, copper, silver, platinum, etc.) that are suitable for a wide range of materials and applications.

Automatic sampler（ASC）Can be used for batch routine testing. This sampler can work day and night, not only making full use of instrument resources, but also saving a lot of time for operators. (For example, conducting calibration tests on weekends when there is no one present).

The injection turntable can be placed at most once 64 Sample and reference crucible, and work in a customized order. The testing atmosphere and cooling device control are both automatic. Individual test condition programming and macro calculations can be performed for each sample. An easy to understand operating interface can guide users to complete a series of test program edits, and during the experiment, they can also make changes to the running program by inserting new test programs into the already written program.