Petroleum wax oil content analyzer (butanone toluene method)
Petroleum wax oil content analyzer (butanone toluene method) model: HAD-L0556
Overview of HAD-L0556
This instrument is designed and manufactured in accordance with the requirements specified in the People's Republic of China standard SH/T0556 "Petroleum Wax Oil Content Determination Method", and is suitable for determining petroleum wax with an oil content of 15% to 55%.
Main technical features of HAD-L0556
1. A design device integrating two cold baths at 0 ℃ and -34.5 ℃, with a 0 ℃ cold bath on the left and a -34.5 ℃ cold bath on the right of the instrument. The two baths have a total of 6 holes and can be grouped for testing the samples.
2. The temperature regulation and control of water bath, cold bath, and evaporation bath all use digital temperature controllers, which are accurate and intuitive in temperature regulation and control.
3. The blowing volume entering the sample in the evaporation device is detected by a glass rotor flowmeter, which can accurately control the blowing volume according to the specific requirements of the test. The blowing time can be set arbitrarily by a timer according to the time requirements of the test.
4. The overall design of the instrument is a desktop structure, with a novel design, reasonable structure, and easy use.
Main technical features and parameters of HAD-L0556
1. Working power supply: AC220V ± 10% 50Hz;
2. Water bath temperature: room temperature~99 ℃± 0.5 ℃
3. Cold bath temperature: room temperature to -40 ℃± 0.5 ℃;
4. Evaporation temperature: 35 ℃± 1 ℃;
5. Flow meters: (4) 0.5-5L/min; ×4
6. The timer has a timing range of 0 to 99 hours and 99 minutes.
7. Environmental temperature: ≤ 30 ℃.
8. Relative humidity: ≤ 85%.
Instrument configuration
Number Name Unit Quantity Remarks
1 Cold bath table 1
2 Evaporation Baths 1
3 filter tube supports 4
4 cone-shaped weighing bottles, only 4
5 thermometers -80 ℃~60 ℃, division value 1.0 ℃, support 1
6 metal mixer supports 1