Paulgothe Conventional Flue Particle Sampling System

NegotiableUpdate on 04/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The conventional flue gas sampling system produced by PaulGothe company in Germany can be used for sampling particulate matter inside and outside the flue.

Product Details

Paulgothe Conventional Flue Particle Sampling System

Automatic constant velocity sampling, made in Germany

The conventional flue gas sampling system produced by PaulGothe company in Germany can be used for sampling particulate matter inside and outside the flue. The system mainly consists of: ① joint sampling head, ② total particulate matter sampling component, ③ drying tower, ④ ITES automatic constant velocity sampler, ⑤ humidity measurement component (optional).

The ITES automatic constant velocity sampler (25.10) includes: an intelligent controller with built-in calibration holes; Sensor box, equipped with interfaces for connecting with pitot tubes and thermocouple sensors; High performance frequency controlled sampling pump with branch valve.

Joint sampling head

Generally, it consists of 2.07 (goose neck connecting tube with different diameter air inlet), 3.01 (front adapter, connecting suction tube and goose neck connecting tube), inner tube (ID 8mm), suction tube (OD 60mm G1/2), pitot tube, and thermocouple.

According to whether it is heated or cooled, it can be divided into three models: non heated (4.51), heated (4.62), and water-cooled (4.72). If the humidity is high and the temperature is high, it is recommended to heat the sampling head; If the temperature is very high, it is recommended to use a water-cooled sampling head.

Material options: T (titanium metal) and A (stainless steel). Available lengths are 500, 1000, 1500, 2000, 2500, and 3000mm.

Image: Non heated joint sampling head

Sampling component

Sampling Component

model	name	Technical Specifications
7.21	Plan filter filter sampler	A or T applicable concentration: ＜ 50mg/m³Filter membrane diameter: 37, 45, 47, 50mm OD: 50, 55, 65, 65mm Length: 110mm, 120mm
7.01	Simple tubular filter device	A or T applicable concentration: ＜ 2000mg/m³OD: 45mm Length: 145mm
7.11	Combination bush and plane filter cartridge filter membrane combination filter	A or T applicable concentration: ＜ 2000mg/m³OD: 55mm Length: 145mm
13.05	High dust tubular filter device, high concentration filter cartridge	A or T applicable concentration:>1000mg/m³OD: 70mm Length: 240mm

The inlet (I) of the above particulate matter sampling components are all internally threaded G1/2, and the outlet (E) is all externally threaded G1/2. Stainless steel can withstand temperatures up to 500 ℃, while titanium metal can withstand temperatures up to 400 ℃.

Technical Specifications

Parameter

ITES automatic constant velocity sampler

Compliant with EN, ISO, and VDI standards

The transport box includes: an intelligent controller with built-in calibration holes, a sensor box, connected to pitot tubes and thermocouples, a rotary vane vacuum pump with good airtightness and corrosion resistance, and other connecting wires

Pressure difference: 0.01~10hPa (± 0.02 hPa)

Absolute pressure: 400~1300hPa (± 0.02 hPa output value)

Thermocouple temperature: 0~500 ℃ (± 0.4% output value)

Flow rate calibration hole: 0.5~4m3/h

Operating temperature: -10~60 ℃

Alarm output: 12V

Power supply: 220V

Weight (including pump): 18.9kg

Size: 350 x 280 x 250 mm

drying tower

Material: PVC

Diameter: 160mm