The conventional flue gas sampling system produced by PaulGothe company in Germany can be used for sampling particulate matter inside and outside the flue. The system mainly consists of: ① joint sampling head, ② total particulate matter sampling component, ③ drying tower, ④ ITES automatic constant velocity sampler, ⑤ humidity measurement component (optional).

The ITES automatic constant velocity sampler (25.10) includes: an intelligent controller with built-in calibration holes; Sensor box, equipped with interfaces for connecting with pitot tubes and thermocouple sensors; High performance frequency controlled sampling pump with branch valve.

Joint sampling head

Generally, it consists of 2.07 (goose neck connecting tube with different diameter air inlet), 3.01 (front adapter, connecting suction tube and goose neck connecting tube), inner tube (ID 8mm), suction tube (OD 60mm G1/2), pitot tube, and thermocouple.

According to whether it is heated or cooled, it can be divided into three models: non heated (4.51), heated (4.62), and water-cooled (4.72). If the humidity is high and the temperature is high, it is recommended to heat the sampling head; If the temperature is very high, it is recommended to use a water-cooled sampling head.

Material options: T (titanium metal) and A (stainless steel). Available lengths are 500, 1000, 1500, 2000, 2500, and 3000mm.

Dioxin/furan sampling

Just add the PCDD/PCDF sampling component to the particulate matter sampling system. There are two models of PCDD/PCDF sampling components to choose from. One is a condensation flask+two-stage adsorption tube, and the other is a condensation flask+collection flask+two-stage adsorption tube.