Ozone colorimetric tube ozone test kit

Product Name: Ozone Colorimetric Tube

Detection range:0.1-0.2-0.5-1-2-5-10mg/l

Packaging specifications: PEPlastic tube, aluminum film seal,50branch/box

Validity period: 18A month

Product Features

Easy to operate - no need for auxiliary instruments, direct detection, no need for professional laboratories and technicians

Fast and efficient -3-5The analysis of a water sample can be completed in minutes, and all reagents and accessories are built-in without the need for additional preparation

Reliable results - introducing Japanese patented technology, the results are consistent with the national standard method

Convenient to carry - PEPlastic test tube, small in size, light in weight, not easily damaged

Convenient storage - can be stored at room temperature, with an expiration date of 18A month

instructions

1Pull out the wire at the tip of the tube

2Drive out the air from the pipe.

3Insert into the tested water quality and stop when about half of the water is sucked in.

4Shake it5-6Next, compare the color with the standard color chart within the specified time.

Color comparison cardinstructions

1、 Sampling

Take a certain amount of the liquid to be tested according to the instructions and place it in a test tube

2、 Reaction

Add the reaction reagent, cover the lid, and fully reverseShould.

3、 Color comparison

AWhen comparing colors, first place the color chart flat in a well lit area

BPlace the colorimetric tube vertically above the colorimetric card (see instructions for details)

CThe testing personnel observe the color through the liquid surface and find the color level that matches the color tone of the liquid in the tube, which is

Parameters to be testedConcentration.

Application scope

In aquaculture, environmental analysis, wastewater discharge and treatment, industrial water use, printing and dyeing, and rinsing

Chemical and Light IndustryIndustrial and electricalSurface coating treatment and water quality analysis in swimming pools are widely used.

matters needing attention

1The liquid to be tested should appear colorless or light colored. For liquids with excessively dark colors, decolorization treatment should be performed before testing.

2In the presence of strong oxidants, color changes may also occur. Oxidizing substances such as residual chlorine and ozone.