-
E-mail
service@aquas.com.tw
- Phone
-
Address
No. 56, Lane 321, Sunshine Street, Neihu District, Taipei City, 11492
Product Categories
Kaichuang Water Resources Technology Co., Ltd
Orthophosphate analyzer
NegotiableUpdate on 06/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The orthophosphate analyzer can provide simple, reliable, and cost-effective monitoring data, and has remote status display, calibration, setting, and fault diagnosis functions.
Product Details
characteristic
- High quality key components such as pumps, valves, and core plates are selected for high reliability and long product lifespan
- Low reagent consumption, minimal waste liquid discharge, environmentally friendly, and low operating costs
- High reliability measurement technology can accurately measure wastewater in extreme situations
- Embedded software and hardware technology, stable and reliable
- Leading signal processing system with high accuracy and good repeatability
- Modular design, high reliability, easy maintenance
- Small size, convenient and flexible transportation and installation
Typical applications
Surface water and wastewater treatment
technical specifications
- RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional)
- Data resolution: 16 bits (0.001% FS)
- Power supply: AC 220 V, 50 Hz
- Protection: polarity, overload, short circuit
- Safety regulations: CE, FCC
Equipped with automatic calibration, alarm and recording functions
Store 20000 notes
4~20 mA analog signal output
Automatic measurement after power outage and restoration
Reagent low level alarm
Equipped with manual, timed and other operating modes
Support multi-point calibration function
measuring principle
The tested water sample reacts with ammonium molybdate in an acidic medium and antimony salt to form phosphomolybdic acid, which is then immediately reduced by ascorbic acid to form a blue complex. Using the principle of photoelectric colorimetry to detect absorbance and calculate the concentration of total phosphorus in the water sample.
SMR77 orthophosphate analyzer
| measuring range | 0.05~2/10/50 mg/L |
| accuracy | ± 10% ± 0.5 mg/L of standard solution |
| resolution | 0.01 mg/L |
| repeatability | ± 10% of standard solution |
| operate temperature | 5~40°C |
| Measurement cycle | 30 minutes to 2 hours, adjustable |
| casing | cast iron |
| size | 780(H) Χ 350(W) X 320(D)mm |
| weight | 20 Kg (without reagents) |
Order number
