Online turbidity electrode OUS31

PDF Data Download OUS31 electrode

---

Instructions for Online Turbidity Electrode
Germany AMER online turbidity electrode OUS31application
Turbidity measurement is an essential parameter for determining water quality and an important control variable in the following situations:
1. Various processes of drinking water production
2. Condensation and flocculation process
3. Filter rupture monitoring
4. Filter backflow monitoring
5. Circulation control of flushing water
6. Control of Liquid Phase Separation Process
7. Boiler inlet water
8. Cooling water monitoring
9. Surface water monitoring
10. Control of effluent from sewage treatment plants
11. Industrial water discharge monitoring
12. Recycling of industrial water
German AMER online turbidity electrode OUS31 technical parameters
Measurement range: 0... 9999FNU/NTU, 0... 3g/L, 0... 3000ppm
Wavelength: 880nm
Factory calibration: formalin standard and silica dioxide
Temperature/pressure: 6bar@25C ， 1bar@50C
Maximum cable length: 200m
Temperature electrode: NTC
Operating temperature:- 5...50C
Protection level: IP68
Electrode material: POM
Optical Window: Sapphire
Germany AMER Online Turbidity Electrode OUS31 Technology
Process and submerged sensors are used for drinking water and industrial water, applying the principle of 90 ° angle scattered light
Characteristics and advantages of German AMER online turbidity electrode OUS31
Can be used as a drinking water sensor, installed at a distance of more than 10cm from the wall
Debugging can be carried out without the need for calibration solution of Formazine
Measurement complies with DIN/ISO standards
Flow type bracket with anti bubble device
Measure under pressure to avoid bubble overflow
By using reflection scattering signal processing, it can be directly inserted into water pipes for measurement
The cleaning brush can be replaced
Self monitoring and credibility testing
Equipped with temperature measurement
The tilted sensor surface is oriented towards the direction of medium flow to improve self-cleaning effect and prevent water bubble interference
Sapphire detection lens
The maximum allowable distance between sensors and transmitters is 200m