Oil pump iph-2B-5-11

NegotiableUpdate on 08/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction iph-2B-5-11

Product Details

Oil pump iph-2B-5-11

Product Introduction

iph-2B-5-11

characteristic

1. On the basis of strict selection of raw materials and heat treatment, advanced precision machining technology independently owned by comprehensive manufacturer Fujitsu is adopted to ensure various

Excellent performance and quality of the product.

2. The hydraulic pump, which generates noise in the equipment, has undergone thorough noise reduction treatment, such as the IP pump, which has low noise and operates quietly.

3. In order to make the flame-retardant hydraulic oil widely applicable to this product, we pay special attention to material selection and surface treatment.

Standard configuration

This is a unit that connects the main pump and motor, directly linking the hydraulic pump to the motor. This type of pump has variable vane and plunger pumps.

Due to their reasonable integration with the motor, both are easy to install and conducive to miniaturization, making them cost-effective.

Standard motor: Fully enclosed anti foaming outer packaging surface flange cooling self operated type (fully enclosed outer fan-shaped).

E type insulation below 3.7kW~4P

5.5kW~4P or above Type B insulation

Voltage 200V ⋯ 50/60Hz

220V⋯60Hz

Pump+motor combination:

1. Please use hydraulic oil from the mineral oil series.

2. Please install an oil suction filter with a mesh size of approximately 100-150 mesh at the suction port.

3. When driving under high pressure or using hydraulic oil with flame retardant properties, if the oil is contaminated, its service life will be greatly affected. Therefore, please use a filter with a diameter of 25 μ m or less.

4. If you want to use hydraulic oil with flame retardancy, the specific usage method needs to be consulted separately. When using hydraulic oil from the water ethylene glycol series.

5. For the viscosity of hydraulic oil, please refer to the relevant information of hydraulic oil separately.

Mechanical dimensions

interface