-
E-mail
sales@nitto-kohki.com.cn
-
Phone
15900816530
-
Address
Lane 481, Xinmin Road, Minhang District, Shanghai
Product Categories
Shanghai Jianyu Industrial Co., Ltd
Nitto Quick Change Connector | NITTO|
NegotiableUpdate on 02/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Nitto quick change connector | NITTO | NITTO quick connector | Nitto tool quick connector | Nitto connector | NITTO KOHKI connector - MAS series $n ● Utilizing oil and air compression cylinders to simultaneously complete multiple piping connections, suitable for use in separate automation systems. The plugs and sleeves are equipped with automatic on-off valves, which prevent the liquid inside the piping from flowing out when disconnected. $n ● In addition to stainless steel material, it can also meet the requirements of non valve type. There are two installation methods for the metal plate (for ordering products): nut ring installation and threaded installation.
Product Details
A single operation can connect multiple pipelines simultaneously. Can handle multiple pipelines of different fluids and sizes.
Using oil and air compression cylinders to simultaneously complete multiple piping connections, suitable for use in separate automation systems.
The plug and sleeve are equipped with automatic on-off valves, which prevent the liquid inside the piping from flowing out when disconnected.
In addition to stainless steel material, it can also meet the requirements of non valve type. (For ordering products)
There are two installation methods for metal plates: nut ring installation and threaded installation.
The maximum allowable eccentricity of MAS type sockets and plugs is 0.6mm.
▌Nitto Quick Change Connector | NITTO|Product specifications and models:
MAS-2P MAS-2S MAS-3P MAS-3S MAS-4P MAS-4S MAS-6P MAS-6S MAS-8P MAS-8S MAT-2P MAT-2S MAT-3P MAS-3S MAT-4P MAT-4S MAT-6P MAT-6S MAT-8P MAT-8S
▌Nitto Quick Change Connector | NITTO|Specifications:
| Main material | Stainless steel (electroless nickel plating) | ||
| Maximum operating pressure (MPa) | 7.0 | ||
| sealing material Temperature range for use | sealing material | Indicate symbols | Temperature range for use |
| fluororubber | FKM | -20°C~+180°C | |
▌Recommended maximum tightening torque (N • m):
| Installation thread size | Rc1/4 | Rc3/8 | Rc1/2 | Rc3/4 | Rc1 |
| MAS type | 14 | 22 | 60 | 90 | 120 |
| Installation thread size | M20 | M24 | M30 | M39 | M45 |
| MAT type | 50 | 50 | 50 | 70 | 80 |
▌Interchangeability:
One size, MAS type can be connected between similar types or between MAS type and MAT type. Connections between similar MAT types are not allowed to be eccentric, so please avoid them.
▌Minimum cross-sectional area (mm)2)：
| Product Model | 2SP type | 3SP type | 4SP type | 6SP type | 8SP type |
| Minimum cross-sectional area | 23 | 41 | 76 | 145 | 224 |
▌Air mixing amount during connection (ml):
| Product Model | 2SP type | 3SP type | 4SP type | 6SP type | 8SP type |
| Air mixing amount | 1.1 | 2.4 | 3.2 | 10.5 | 17.0 |
▌Holding force during connection (N):
| Product Model | 2SP type | 3SP type | 4SP type | 6SP type | 8SP type |
| Maximum holding force | 3200 | 5200 | 9200 | 13900 | 20200 |
| Calculate the required Minimum connection retention force | PX18.5+45 | PX310+70 | PX545+85 | PX850+95 | PX1225+120 |
▌Flow pressure loss characteristic diagram
▌Usage example:
▌Product Model and Size Table:
