Ningbo 3-ton storage tank weighing module 5T reactor weighing system

Product Name: Weighing Module

Product brand: Shanghai Hento;

Range: 500kg, 1t, 2t, 3t, 5t, 10t.

Ningbo 3-ton storage tank weighing module 5T reactor weighing systemType:

FW static load module: mainly suitable for static load weighing occasions with small lateral forces. Static loads can be easily installed on containers of various shapes.

CW dynamic load module: mainly suitable for mechanical devices that withstand horizontal forces such as assembly lines, conveyors, etc. In addition, dynamic loads can also be used for the modification of mechanical platform scales.

Ningbo 3-ton storage tank weighing module 5T reactor weighing systemInstallation method:

1. Made of stainless steel material, it effectively resists the erosion of corrosive substances. There are three types of structures: fixed, floating, and semi floating, which can be used under various harsh conditions.

2. In the installation method using four dynamic loads, generally two of them are limited on three sides, and the other two are only limited at the end.

3. Installation method of static load module:

Made of stainless steel material, it effectively resists the erosion of corrosive substances. There are three types of structures: fixed, floating, and semi floating, which can be used under various harsh conditions.

4. Installation method of dynamic load module:

In the installation method using four dynamic loads, generally two of them are limited on three sides, and the other two are only limited at the end.

Debugging precautions:

1. Before module debugging, it is necessary to check whether the top nut of each supporting screw has been loosened and whether the sleeve is in a free state. Otherwise, significant errors may occur, and even weighing may not be possible.

2. When debugging, it is necessary to check whether each parameter's factory set value meets the actual needs, especially the "power on reset" parameter. It is generally set to "automatic reset when turned on" at the factory. It is recommended to change it to "prohibit automatic reset when turned on" on the container scale to prevent the weight of the container's material from being reset and lost when turned on again due to power outages or other reasons.

3. The range setting does not refer to the rated total load of a set of modules, nor does it include the weight of the container itself. Instead, based on the weighing of large materials, the range should be selected from the division number and division value given in the manual, which is greater than or equal to the weight of the large scale.

4. The power supply voltage of the weighing display instrument must meet the requirements. If the voltage is unstable and exceeds the allowable range, it will cause digital drift. Use a regulated power supply.

Due to the ease of achieving process automation weighing and networking with computers, the weighing system composed of modules will be increasingly widely used in chemical enterprises.

The weighing module is a new type of sensor application structure. It integrates high-precision shear beam weighing sensors, load transmission devices, and installation connection plates into one, ensuring the high precision and long-term stability of the shear beam sensors while solving the problem of weighing errors caused by improper installation. There are three types of structures: fixed, floating, and semi floating, which can be used under various harsh conditions. In the installation method using four dynamic load modules, generally two of them are limited on three sides, and the other two are only limited at the end. Due to the ease of achieving process automation weighing and networking with computers, the weighing system composed of modules will be increasingly widely used in chemical enterprises.