Nakanishi Zhongxi Electric Spindle Speed Regulator HES810-BT30

Nakanishi Zhongxi Electric Spindle Speed Regulator HES810-BT30

Nakanishi Zhongxi Electric Spindle Speed Regulator HES810-BT30It belongs to the NAKANISHI E3000 series of high-speed electric spindles, with a speed of up to 80000 revolutions per minute, a jumping accuracy of 1 μ m, an output power of 350W, and a tool shank diameter of 0.5-4mm. It is usually installed on CNC machining centers and other machine tools, suitable for high-speed engraving, milling, drilling, or polishing of micro diameter tools.

Electric spindle speed reducer HES810-BT30Product Parameters

Spindle model: HES810-BT30

Speed: 20000-80000 RPM Adjustable Recommended Speed 50000-80000 RPM

Accuracy: within 1 μ m

Output power: 350W

Weight: 4.9kg

Chuck: CHA series

Clamping tool shank diameter: φ 0.5- φ 4.0mm

Nut model: CHN-A

Electric spindle speed reducer HES810-BT30Product advantages

1. Easy installation: The bracket can be installed on the tool holder of the CNC machining center for use.

2. High speed: 80000rpm, adjustable speed;

3. High precision: using ultra-high precision bearings, with a runout accuracy within 1 μ m;

4. Stable operation: Low heat generation, can run continuously for 24 hours without interruption;

5. Save machine tool spindle consumption: independent drive, machine tool spindle does not need to work, improving the service life of machine tool spindle;

Electric spindle speed reducer HES810-BT30Product Application

(1) Speed increasing tool holders are mainly used to increase the speed of machine tools, enabling high-speed cutting to achieve good smoothness, precision, and improve processing efficiency. They are commonly used in precision molds, microelectronics, precision instruments, aviation energy, and other fields;

(2) When using micro milling cutters and drill bits for machining, it is necessary to use high rotational speeds to improve surface machining quality and greatly increase machining efficiency. If the rotational speed of the machine tool itself cannot meet the requirements, a speed increasing tool holder must be used;

(3) It can be installed on machine tools such as machining centers, CNC turning centers, boring and milling machines, making it possible for ordinary machining centers to perform high-speed milling, engraving, drilling, and high gloss polishing.