NOVOTECHNIK Sensor TMI-1000-002-423-102

NOVOTECHNIK introduced potentiometers into the field of general mechanical engineering in the 1950s. Since then, the company has developed technology for position sensors and rotary and linear potentiometers, setting standards for excellent linearity and reliability over an extended lifespan.

NOVOTECHNIK Sensor Technical Parameters

Introduction to NOVOTECHNIK Sensor TMI Series

description

The starting and ending positions of TLM/TMI sensors with analog interfaces can be adjusted according to application requirements. The output range (0.. 10 V/10.. 0 V/0.. 20 mA, etc.) can be redefined. Up to two connection pins and simple programming steps can be used to recalibrate two position markers simultaneously. After reprogramming, the linear relationship set is still guaranteed.

Programming methods

The position marker (s) needs to be placed at the starting position of the new target. Continuously apply a high level to pin 8 (PROG) for at least 3 seconds to activate the programming mode. Subsequently, the high low transition (lasting 3 seconds) on pin 4 (DIAG) will set the starting position. Then, place the position marker at the end position of the target. The next high to low transition (3-second low level) will set the termination position. Finally, restore the low level of pin 4 and the high level of pin 8.

If a system with two position markers is used, both positions will be reprogrammed simultaneously.

If programming is not completed within 60 seconds, i.e. the time from the rising edge of pin 8 (ROG) to the end position being read exceeds 60 seconds, the start/end position will be ignored and not written into the sensor's EEPROM.

Conditions for continuous programming:

Time control must meet the requirements

The termination position should be greater than the starting position

There should be no error state, for example: if the system uses two magnets, both magnets must work properly

Other commonly used models of NOVOTECHNIK sensors:

NOVOTECHNIK TMI-1000-002-423-102

NOVOTECHNIK TM1-0150-002-423-101

NOVOTECHNIK TMI-0400-008-222-301

NOVOTECHNIK TMI-0500-008-222-301

NOVOTECHNIK TMI-0700-008-222-301

NOVOTECHNIK TMI-0900-008-222-301

NOVOTECHNIK TRANSDUCER NEW + ORIGINAL+ ONE YEAR WARRANTY

Aize Industrial was established in 2010, positioned to provide manufacturing technology and equipment to the manufacturing industry. Agent operation of electrical automation, machinery and transmission, fluid control, instrumentation, tools and other products. As a partner in electrical, hydraulic, and pneumatic solutions, we utilize our collaborative team to provide customers with advanced solutions, market knowledge, and related value-added services to help optimize their work efficiency, improve reliability and safety, and strive to become a high-quality channel for industrial products and solutions.

If there is anything aboutNOVOTECHNIK Sensor TMI-1000-002-423-102Please feel free to communicate with us if you have any questions. We will do our best to solve your problem.

NOVOTECHNIK Sensor TMI-1000-002-423-102Technical Specifications