NIVELCO NIVELCO Echo TREK Integrated Ultrasonic Liquid Level Gauge from Hungary

NegotiableUpdate on 07/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NIVELCO's integrated ultrasonic level gauge is an excellent level measurement tool. The integrated ultrasonic level gauge is widely used for measuring the liquid level and volume of tanks, water tanks, and reservoirs, and can also be used for flow measurement in open channels. In practical use, many interfaces cannot be touched, such as those that corrode measuring equipment products (acid, alkali), contaminate measuring equipment (sewer), or substances that produce adhesives on measuring devices (adhesives). Due to the fact that the integrated ultrasonic level gauge measurement technology is based on non-contact ultrasonic principles, the integrated ultrasonic level gauge is suitable for liquids that cannot be physically contacted

Product Details

NIVELCOThe integrated ultrasonic level gauge measurement technology is based on the non-contact ultrasonic principle, soIntegrated ultrasonic level gaugeSuitable for liquids and material positions that cannot be physically contacted.IntegratedUltrasonic level gaugeThere are many advantages:

Excellent focusing: 5-degree beam angle
● NIVELCOIntegrated ultrasonic level gaugeMultiple sensor materials
●haveBuilt in full range temperature compensation
● Built in secondary lightning protection
●be equipped withEcho TREK specialized sight
● NIVELCOThe protection level of the integrated ultrasonic level gauge isIP68。

The parameters of NIVELCO integrated ultrasonic level gauge are as follows:
Range 4m, 6m, 8m, 10m, 15m, 25m
Sensor material PP, PVDF, PTFE, stainless steel (DIN1.4571, AISI SS316Ti)
Launch angle 5 °~7 °
Shell material plastic: PBT fiberglass, flame retardant (DuPont) aluminum: dust-proof coating
Working temperature: PP, PVDF, PTFE type: -30 ℃~+90 ℃; Stainless steel type: -30 ℃~+100 ℃ (can withstand CIP 120 ℃ and can withstand 2 hours of cleaning)
Environmental temperature -30 ℃~+60 ℃ (equipped with SA-100 programmer), -25 ℃~+60 ℃ and avoid direct sunlight
Pressure (absolute) 0.5-3bar (0.05-0.3MPa) Stainless steel 0.9-1.1bar (0.09-0.1MPa)
Sealing strip material PP type: EPDM; Other models: FKM (VIton)
Protection level sensor: IP68 (can be immersed in water); Shell: IP67 (NEMA6)
Power supply/power consumption high voltage type: 85-255VAC/6VA; Low voltage type: 10.5-40VDC/3.6W, 10.5-28VA/4VA
Accuracy ± (0.2% measurement distance,+0.05% range)
Resolution measurement distance:<2m: 1mm, 2-5m: 2mm, 5-10m: 5mm; >10m: 10mm
Output analog output: 4-20mA, 600 Ohm
Contact output: 250VAC, 3A
Computer: RS485 (optional)
HART (optional)
Display (SAP-100): 6-digit, graphic, user LCD
Electrical connection 2 × Pg16 or 2-1/2 "NPT; Wire cross-section: 0.5-2.5mm2
Aluminum casing for electrical protection: Class I, plastic casing: Class II.