NIVELCO Integrated Ultrasonic Level Gauge STD-34J-1

NegotiableUpdate on 07/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NIVELCO's ultrasonic level gauge STD-34J-1 adopts non-contact ultrasonic level measurement technology, which can be used for measuring the level, volume, and weight of solids in storage tanks. When physical contact with the measured medium is not possible for some reason, this product can be used for level measurement. In practical applications, it can also replace some high maintenance level measuring instruments, such as capacitors, slurry wheels, heavy hammers, etc.

Product Details

NIVELCOUltrasonic level gaugeProduct features:
The range is 15 meters/30 meters/60 meters
4-20mA output+1 relay
Excellent focusing: 5-degree beam angle
● Multiple sensor materials
● Built in full range temperature compensation
● Built in secondary lightning protection
Echo TREK specialized sight
The protection level is IP68
● Equipped with LCD display and button calibration
● HART, RS485, relay output optional
● Dust explosion-proof certification is optional

NIVELCO integratedUltrasonic level gaugeThe parameters of STD-34J-1 are as follows:
Sensor material: Polyurethane probe surface, aluminum shell
Shell material: cast aluminum spray coating
Launch angle: 5 degrees
Process temperature: -30 ℃~+75 ℃
Environmental temperature: STD-300: -30 ℃ to+60 ℃; SBD-300：-25℃～+60℃
Pressure (absolute): 0.7-1.1 bar (0.07-0.11 MPa) ± 0.05 bar (0.05 MPa) Difference between open and closed
Mechanical protection: Sensor: IP65 (NEMA 5)
Shell: IP67 (NEMA 6)
Power supply/power consumption: Voltage I: 120-375VDC/5.5W and 85-255VAC (50/60Hz)/6.8VA
Voltage II: 10.5-40VDC/3.6W and 10.5-28VAC (50/60Hz)/4.6VA
Accuracy: ± (0.2% measurement distance+0.1% range)
Resolution: 10mm
Output: Analog: 4-20mA, 600OHm, isolated, secondary relay protection
Relay: SPDT, 250VAC, 3A, ACI
Display: Only applicable to SBD-300
Number: HART with Eview configuration software; RS485 with Modbus
Electrical connection: 2 × Pg and 2 × 1/2 "NPT line position selection (recommended)
Electrical protection: Class I