NIVELCO EasyTREK Split Ultrasonic Level Gauge

NegotiableUpdate on 07/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NIVELCO EasyTREK is a split type, three wire ultrasonic level gauge with a measurement range of up to 60 meters. It also comes with a aiming device that can be adjusted online, greatly reducing measurement errors caused by different measurement positions. The ultrasonic level gauge also comes with the HART transmission protocol, which enables online programming and has explosion-proof version functionality.

Product Details

NIVELCOEasyTREK split type, three wire systemUltrasonic level gaugeProduct features:
The range is 15 meters/30 meters/60 meters
● PC and HART calibration
4-20mA output+1 relay
Equipped with HART and relay output
● Dust explosion-proof certification is optional

The parameters of the split type ultrasonic level gauge are as follows:

Sensor material: Polyurethane probe surface, aluminum shell
Shell material: cast aluminum spray coating
Launch angle: 5 degrees
Process temperature: -30 ℃~+75 ℃
Environmental temperature: STD-300: -30 ℃ to+60 ℃; SBD-300：-25℃～+60℃
Pressure (absolute): 0.7-1.1 bar (0.07-0.11 MPa) ± 0.05 bar (0.05 MPa) Difference between open and closed
Mechanical protection: Sensor: IP65 (NEMA 5)
Shell: IP67 (NEMA 6)
Power supply/power consumption: Voltage I: 120-375VDC/5.5W and 85-255VAC (50/60Hz)/6.8VA
Voltage II: 10.5-40VDC/3.6W and 10.5-28VAC (50/60Hz)/4.6VA
Accuracy: ± (0.2% measurement distance+0.1% range)
Resolution: 10mm
Output: Analog: 4-20mA, 600OHm, isolated, secondary relay protection
Relay: SPDT, 250VAC, 3A, ACI
Number: HART with Eview configuration software; RS485 with Modbus
Electrical connection: 2 × Pg and 2 × 1/2 "NPT line position selection (recommended)
Electrical protection: Class I