Pressure swing adsorption method（PSA）It is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen concentrators. This process uses Two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules, And the required gas is allowed to pass through.When the active column is saturated, the airflow is redirected to the second column. Saturation tower depressurization to complete molecular sieve Full regeneration, this process is constantly repeated.

Pressure swing adsorption (PSA) is a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen concentrators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile oxygen production workstation 04FS Czech imported mobile oxygen production workstation 04FS Czech imported pressure swing adsorption (PSA) method is currently a commonly used non low temperature oxygen and nitrogen production process, which is effective for small and medium-sized oxygen generators. This process uses two columns filled with adsorbents and one molecular sieve. Clean and dry compressed air enters a column, capturing unwanted molecules while allowing necessary gases to pass through. When the active column is saturated, the airflow is redirected to the second column. The saturation tower depressurizes to completely regenerate the molecular sieve, and this process is repeated continuously.
Mobile Oxygen Production Workstation 04FS Czech Imported Mobile Oxygen Production Workstation 04FS Czech Imported

TECHNICAL PARAMETERSBasic Parameters

Air compressor capacityCompressor capacity: 0.80 m3/min FAD

Minimum inlet air pressureMinimum intake pressure: 7 Jobs

Max operating pressureHigh intake pressure: 8 Jobs

Feed air qualityInhalation air quality: ISO 8573.1:2010 class 1.4.1.

Dew pointdew point: +3°C

Oil contentoil content: <0.01 micron(Microns)

Dimensionssize: 2900x2200x2300（W×H×D）mm

Total WeightTotal weight:2100Kg

POWER SUPPLYpower supply

Generatorgenerator: 240-110V 50/60Hz 1Phase 0.1kW

Compressorcompressor: 400V 50Hz 3Phases 5.5kW

Dryerdryer: 230V 50Hz 1Phase 0.29kW

HPHigh pressure oxygen compressor: 120-240V 50/60Hz 1Phase 1.1kW

STANDARD DESIGNStandard Configuration

Oxygen Generator O9：flow 4.1 m3/h (ref. 20°C, 1.013barA) at 93 % purity, outlet pressure 4barG

Oxygen generator: flow rate4.1m³/Hour (temperature)20°C，1.013BarA）Purity93%Export pressure4BarG

Control system with Siemens Color Touch Screen, including gas purity sensor

Siemens color touchscreen controller, including gas purity sensor

150L Oxygen Buffer Tank, including dust filter and pressure regulator

150LOxygen buffer tank, including dust filter and pressure regulator

8 Bar Compressor Kaisers, incl. cyclone filter and recordation

8 BarCompressor, including cyclone filter and ecological drainage pipe

Refrigeration dryer , Nominal flow 2.6m3/min

Freeze dryer, rated flow rate2.6m³/minute

Air filtration set，1micron and 0.01micron filter, including drain system

Air filtration device,1 Microns and0.01 Micro filter, including drainage system

Carbon Tower，oil vapor and odor absorber, max. flow rate 2.5m3/min, incl. oil indicator and dust filter

Carbon tower, oil vapor and odor absorber, high flow rate2.5m3/Minutes, including oil indicator and dust filter

200L Air Tank，including hoses and connections

200LGas storage tank, including hoses and fittings

HP O2 compressor 2PS-H50, flow 1.7 to 3.4 m3/h, discharge pressure 150Bar

High pressure oxygen compressor, flow rate1.7-3.4m³/Hour, emission pressure150Bar

Filling Ramp for 4 cylinders, including safety valve, manometer, pressure hoses

4 Channel release platform, including safety valve, pressure gauge, pressure hose

Gas Filtration, Bacterial/Sterile filter 42m3/h

Gas filter, bacteria/Aseptic flow rate42m³/hour

Mol sieve protection from moisture with automatic recovery

Molecular sieve moisture-proof system with automatic restoration function

Purity control, Built-in gas quality control - ensures the required purity is guaranteed, any out-of specification gas is automatically channeled through exhaust until the required purity is achieved

Purity control, built-in gas quality control-Ensure the required purity is guaranteed, and any specification of gas is automatically guided through the exhaust pipe, Until the required purity is achieved

Audio/visual alarm MEDICAL

Medical tricolor alarm light

UPS SIEMENS - Uninterrupted power supply

Siemens uninterruptible power supply

Steel skid platform

Loading platform

NoteAttention:

All products are manufactured and delivered in compliance with all relevant EC directives.

All products are manufactured and delivered in compliance with all relevant EU directives

Delivered according to General terms and conditions of sale and supply.

Delivery according to general sales and supply terms and conditions

Conversion ratesconversion rate:

1m3 = 1.43kg (ref. condition for m3 0°C and 1013 mbar)

1 cubic meter=1.43Kilogram (reference condition)0 Celsius and1013Mbar）

1m3 = 1.33kg (ref. condition for m3 20°C and 1013 mbar

1 cubic meter=1.33Kilogram (reference condition)20 Celsius and1013Mbar）

PRICE OF THE OXYGEN GENERATING SYSTENM AND FILLING STATION O4FS

Mobile oxygen production workstationO4FSquotation: 1000000 .00RMB

In above-mentioned prices are included the constructional processing, the production, the package and the delivery of the accompanying technical documentation and 13% China VAT tax.The above price includes the costs of design, processing, production, packaging, and transportation of accompanying technical documents to the port13%Value added tax.

TERMS OF PAYMENTPayment Terms

Price will be paid according to the following invoicing plan

The payment for the goods will be made according to the following payment methods:100% - with the order（100%Payment).

DELIVERY DATEDelivery date

Delivery date is max.12 -16 weeks from the signature of the contract of purchase and settlement of the upfront payment. If you order something of optional accessories the delivery time can be extended.The delivery date is after the contract is signed12-16Within the week. If optional accessories are ordered, the delivery date may be delayed.

GUARANTEE AND THE SERVICEwarranty period

We provide a guarantee for the equipment for 12 months from commissioning. The general delivery terms and conditions of guarantee from Oxywise, s.r.o. are valid

The warranty period is after the start of use12 Months, the warranty terms can be found in the "Regulations of the Government"

Enclosure No. : the photo of the Oxygen Generating System 04FS

Attachment1Mobile oxygen production workstation04FSimage