The micro Raman measurement system consists of a fiber optic spectrometer, a Raman stabilized laser, a Raman probe, an LED light source, a metallographic microscope, and other components. By integrating the spectral module into the microscope, Raman spectral information can be measured. The system is free and flexible, with the ability to real-time image and collect Raman spectra of objects in small areas, helping users quickly test and analyze the microstructure and microscopic spectral information of samples; Compared to traditional Raman spectrometers, MR Raman spectrometers have the characteristics of good reproducibility, fast measurement speed, and high sensitivity; Suitable for samples such as solids, powders, and liquids. The main application areas are biomedicine, gemstone identification, nanomaterials, polymer materials, cell detection, etc.

High spatial and spectral resolution;

◆ Good stability;

◆ High coupling efficiency.

1. application area

vBiomedical

vBiological cell detection

vpetrochemical industry

vMaterial analysis

vOptical Experiment Teaching

vCharacterization of nanomaterials

vGemstone appraisal

2. Operation steps

ØMicroscopic imaging operation steps:

1)useConnect the camera and display screen via HDMI cable, and connect the camera's DC 5V power supply;

2)Connect the back of the microscope base220V power supply, the bottom left and right ends of the microscope are respectively equipped with transmission and reflection lighting source switches, and the lighting switch and brightness are selected according to the selected application;

3)Select the appropriate magnification objective lens for the rotary converter;

4)Adjust the 3D platformFocus on the object to make the target a clear image.

ØRaman measurement operation steps:

1)Install on computerUspectralPro software, during the software installation process, will automatically install the spectrometer driver program;

2)Power interface connection5V/2A power supply, connect the spectrometer to the computer using a USB data cable;

3)openUspectralPro software for laser and spectrometer parameter control (see UspectralPro software user manual for detailed instructions);

4)After installing the required sampling accessories for the probeAlign the probe with the sample and use UspectralPro software to collect data from the sample to be tested;

5)After collecting the dataYou can use UspectralPro software for data processing.

3. Maintenance and upkeep

1)Spectrometer maintenance:

vWhen the spectrometer is not in use,Should be stored at room temperature, in a dry and dust-free environment,Because high or low temperatures, excessive humidity, and dust accumulation can all affect the accuracy of spectrometer use.

2)Spectrometer maintenance:

vIf the spectrometer cannot be used normallyPlease contact our customer service personnel in a timely manner. Do not disassemble without the permission of our company, which may affect the warranty. The warranty period and terms of the product are detailed in the warranty card. Please keep the warranty card safe.

4. matters needing attention

1)instructions:

vThe spectrometer is in operation,Please do not place the spectrometer on the edge of a table or other easily dropped areas,To prevent the spectrometer from falling off,Causing damage or affecting the accuracy of the spectrometer's use;

vIf usedWhen driving the spectrometer with a Pad tablet device, please confirm whether the power supply of the spectrometer is stable;

vWhen using and storing the spectrometerIt is essential to ensure that the bending radius of the optical fiber is not less than 80mm, and to avoid pulling, squeezing, or twisting forcefully to prevent core breakage.

vAfter using the spectrometer, please put on a dust cap on the probe in a timely manner.

2)Safety instructions:

vDuring the use of the spectrometer,Do not look directly at the front light outlet of the probe during laser signal transmission,To prevent burns to the retina;

vWhen the product reaches the end of its final use or needs to be scrapped,Please comply with national and local environmental protection requirements,Do not discard it casually.