Melting furnace PTMk. II 1200 degree muffle furnace

The PT Mk.II model focuses on energy conservation and is suitable for foundries with limited installation space. The high temperature inside the furnace is 1100 ℃ (1050 ℃ inside the crucible). The high-tech insulation material and heating wire installation system of PTMk.II have minimized the external dimensions of the furnace. The heating wire is located in the refractory casting groove to prevent overheating. The installation position of the heating wire can effectively prevent aluminum liquid from splashing onto the heating wire and causing damage in case of accidental rupture of the crucible. The energy consumption of PT Mk.II furnace has dropped to a low point. Low energy consumption, new insulation system. Melting furnace PTMk.II 1200 degree muffle furnace PT Mk.II model focuses on energy saving and is suitable for foundries with limited installation space. The high temperature inside the furnace is 1100 ℃ (1050 ℃ inside the crucible). The high-tech insulation material and heating wire installation system of PTMk.II have minimized the external dimensions of the furnace. The heating wire is located in the refractory casting groove to prevent overheating. The installation position of the heating wire can effectively prevent aluminum liquid from splashing onto the heating wire and causing damage in case of accidental rupture of the crucible. The energy consumption of PT Mk.II furnace has dropped to a low point. Low energy consumption, new insulation system. Melting furnace PTMk.II 1200 degree muffle furnace PT Mk.II model focuses on energy saving and is suitable for foundries with limited installation space. The high temperature inside the furnace is 1100 ℃ (1050 ℃ inside the crucible). The high-tech insulation material and heating wire installation system of PTMk.II have minimized the external dimensions of the furnace. The heating wire is located in the refractory casting groove to prevent overheating. The installation position of the heating wire can effectively prevent aluminum liquid from splashing onto the heating wire and causing damage in case of accidental rupture of the crucible. The energy consumption of PT Mk.II furnace has dropped to a low point. Low energy consumption, new insulation system. Melting furnace PTMk.II 1200 degree muffle furnace PT Mk.II model focuses on energy saving and is suitable for foundries with limited installation space. The high temperature inside the furnace is 1100 ℃ (1050 ℃ inside the crucible). The high-tech insulation material and heating wire installation system of PTMk.II have minimized the external dimensions of the furnace. The heating wire is located in the refractory casting groove to prevent overheating. The installation position of the heating wire can effectively prevent aluminum liquid from splashing onto the heating wire and causing damage in case of accidental rupture of the crucible. The energy consumption of PT Mk.II furnace has dropped to a low point. Low energy consumption, new insulation system. Melting furnace PTMk. II 1200 degree muffle furnace

Application scope:Melting furnace PTMk. II 1200 degree muffle furnace The PT Mk.II model focuses on energy conservation and is suitable for foundries with limited installation space. The high temperature inside the furnace is 1100 ℃ (1050 ℃ inside the crucible). The high-tech insulation material and heating wire installation system of PTMk.II have minimized the external dimensions of the furnace. The heating wire is located in the refractory casting groove to prevent overheating. The installation position of the heating wire can effectively prevent aluminum liquid from splashing onto the heating wire and causing damage in case of accidental rupture of the crucible. The energy consumption of PT Mk.II furnace has been reduced to the lowest point. Low energy consumption and new insulation system make PT Mk.II furnace one of the economical aluminum processing furnaces in the market. The standard design includes: Manually open the furnace cover; Ht40T controller; Independent restriction unit; Crucible protection ring; Emergency drain outlet at the bottom of the furnace (with furnace cover); Leakage protector; The connecting wire between the furnace and the control cabinet is located inside a metal hose, with a length of 5 meters; Wall mounted control cabinet; 3 ammeters; Power reduction system; Additional fee attachments: Solution measurement thermocouple with protective tube; Thermocouple inside the crucible wall; Crucible; Noltina crucible with thermocouple; Furnace cover control system; HT200 controller with USB output; The pedal controls the automatic opening of the furnace door; Modification connected to the distributor of the die-casting machine; Crucible damage monitoring system; Controller measurement input calibration; The connection between the electric furnace and the control cabinet is protected by a metal sheath; HtManit Universal Monitoring Program (including software and interfaces); An alarm signal system triggered when the temperature drops below 650 ° C. Advantages: High quality insulation materials and optimized furnace dimensions minimize energy loss; The heating wire located in the refractory casting groove is easy to replace, reducing maintenance costs; The cast refractory material protects the heating wire from damage caused by molten material splashing; The casting refractory material isolates the heating wire from the insulation layer; The furnace is equipped with an emergency drainage outlet; The compact external dimensions and lower height of PT MK.II furnace reduce the amount of labor and the need for adjustments during installation; The lower installation power reduces power consumption; Excellent temperature uniformity increases the lifespan of the crucible; The warranty for heating wire is 24 months. Type LAC Serial No. output Kg Al high temperature ℃ Crucible model Crucible Crucible volume L Operating height mm input Kw weight kg Protection level A voltage V PT 100111 Mk.II 105 1100 A300 40 790 23 450 40/3 400 PT 200111 Mk.II 185 1100 BU 200 70 850 46 555 80/3 400 PT 300111 Mk.II 275 1100 BU 300 110 950 50 670 100/3 400 PT 400111 Mk.II 320 1100 BU 350 135 1050 54 758 100/3 400 PT 500111 Mk.II 480 1100 BU 500 180 1100 61 890 125/3 400 PT 650111 Mk.II 590 1100 BU 600 220 1300 75 1125 125/3 400 PT 800111 Mk.II 970 1100 BN 800 300 1400 95 1210 160/3 400 PT 900111 Mk.II 1080 1100 BN 900 370 1500 110 1310 200/3 400 PT 1200111 Mk.II 1250 1100 BN 1200 470 1650 130 1460 250/3 400 Order number and furnace size with different covers Jealous Cover Options Automatic lid Yu Dong Lid Type LAC Serial No. Order Number wx hx d【mm】 Order Number wx hx d【mm】 PT100/11 Mk.II 950x980x1120 950x1360x950 PT200/11 Mk.ll 1035x1035x1205 1035x1420x1025 PT300/11 Mk.ll 1125x1135x1295 1125x1520x1115 PT400/11 Mk.II 1125x1335x1295 1125x1720x1115 PT500/11 Mk.ll 1285x1280x1470 1285x1670x1275 PT650/11 Mk.II 1285x1480x1470 1285x1870x1275 PT800/11 Mk.ll 1400x1605x1605 1400x1970x1390 PT900/11 Mk.ll 1400x1705x1605 1400x2070x1390 PT1200/11 Mk.II 1400x1855x1605 1400x2220x1390 Hourly power consumption in standby mode, full furnace, new crucible Insulation at 700 ° C Insulation at 800 ° C Melting output Type LAC Serial No. close lid Open the lid close lid Open the lid Kg Al/ h PT 100/11 Mk.II 1,9 3,1 2.5 4,7 64 PT200/11 Mk II 2,3 4,4 2.9 6,8 133 PT 300/11 Mk.II 2,9 6,1 3,6 9,5 143 PT 400/11 Mk.II 3.0 6,2 3.8 9,6 155 PT500/11 Mk II 3,6 9,3 4,6 14,7 175 PT 650/11 Mk.II 3,9 9,6 5.0 15,2 217 PT 800/11 Mk.II 4,7 12,4 5,9 19,6 275 PT 900111 Mk.II 4,9 12,5 6.1 19,8 300 PT1200/11 Mk.lI 5,2 12,7 6,5 20,0 350