MaFu furnace 1200 degrees Czech imported ashing furnace LZ

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 1200 degree Czech imported ashing furnace LZ is an ideal choice for sample oxidation and ash quality determination tests. Equally suitable for any application that requires sufficient fresh air and exhaust. The air inside the 1200 degree Czech imported ashing furnace LZ is circulated an average of 6-12 times per minute, depending on the temperature of the furnace. The oxidation process can be assisted by inputting oxygen. The air is preheated before entering the furnace, thereby achieving uniform temperature distribution during high-temperature operation.

Product Details

Ash furnace LZ] muffle furnace 1200 degrees Czech imported ash furnace LZ

Laboratory ashing special furnace
The LZ ashing furnace is an ideal choice for sample oxidation and ash quality determination tests. Equally suitable for any application that requires sufficient fresh air and exhaust.

The air inside the furnace circulates an average of 6-12 times per minute, depending on the temperature of the furnace. The oxidation process can be assisted by inputting oxygen. The air is preheated before entering the furnace, thereby achieving uniform temperature distribution during high-temperature operation.

The standard accessories for the furnace include: muffle furnace 1200 degrees Czech imported ashing furnace LZ

HT40AL controller (1 set of programs: 2 heating and 2 insulation)
The heating wire is located inside the ceramic panel
Mineral fiber insulation board
S-type thermocouple
Contactless solid-state thermocouple, operates quietly
The furnace door is equipped with a safety switch to ensure that it can be safely opened
The furnace door is manually opened downwards
Desktop design

Additional optional accessories:

HT Industrial, HT205 Controller (30 sets of programs, each with 15 steps)
Protect the bottom plate
Controller input measurement calibration
RS232 or EIA485 interface (including data cable and software)
HTMonit suite (software and interfaces)

Note: Please consult our technicians before combining optional accessories.

*The height of the furnace includes the chimney
**The protection may vary depending on the selected accessories