MONITOR GX Diaphragm Level Switch 7-8156

NegotiableUpdate on 05/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MONITOR membrane level switch is composed of reliable and durable single point control switches, which can be used for single point control of dry powder levels. It can also be used to prevent overflow of the level, or to maintain the set level, display information on inclined channels or blockage during transmission, etc. In addition, the product is very easy to operate, and installation, maintenance, equipment replacement, or sensitivity adjustment can be carried out outside the container. However, it is not recommended to use membrane level switches in environments where materials are extremely light, viscous, or have large particles.

Product Details

MONITORCharacteristics of diaphragm level switch:

There are multiple materials to choose from, including chloroprene rubber and Teflon
Control the material level by detecting the pressure generated by the material in the warehouse acting on the sensor
UL and CSA certifications

The parameters of MONITOR membrane level switch 7-8156 are as follows:

Power supply: No power supply required
Output: SPDT, 15A@480VAC
Sensitivity: GX-SS - minimum material density 20lb/ft3
Standard switch - minimum material density 15lb/ft3
High sensitivity switch - minimum material density of 10lb/ft3
Shell: Cast aluminum
Protection level: NEMA 4, IP65
Installation connection: flange with 7.5 "thread
Pressure level: Atmospheric pressure
Wiring: 1/2 "NPT
Pressure film material: chloroprene rubber; Teflon; 321ss (GX-SS only)
Operating temperature: G/GX chloroprene rubber: -40 ℃ to 180 ℃ F
G/GX Teflon: -40 ℃ to 250 ℃ F
GX-SS: -40 ℃ to 250 ℃ F
Weight: G: 2.75lb; GX,GX-SS:3.25lb
Certification: G: CSA General Place
GX,GX-SS: UL&CSA Class Ⅱ
Div 1,2Groups F,G; CE certification
Minimum container size: 12 '(small containers require adjustment and extension of padding)