MG220 High Pressure Sampling System

1application area

High pressure liquid injection in the petroleum and petrochemical industry；

Control software: MNK control software can achieve online sampling and analysis of chromatography instruments (can be used in conjunction with Agilent Chemstation)；

Measurement medium: liquefied natural gas (calibration standard), ethylene, propylene and butadiene, hydrocarbon samples (C5-C40).

2、 Instrument features

Better analysis results can be obtained for polar samples such as ethylene glycol；

This device can be used to analyze wide boiling point hydrocarbon samples (C5 to C40)；

Using a 0.5 µ L valve core can be used for analysis of trace impurities (other specifications are optional)；

Small size, good repeatability, with a relative standard deviation usually below 1%；

Equipped with filtering, high-pressure steel cylinder quick connect fittingsHighlight and enlarge the display windowSampling cylinder bracket, etc；

Flexible installation: complete installation or uninstallation within 10 minutes.

3、 Technical parameters

Pressure working range: 0.7-4MPa；

Installation method: It can be directly installed above the injection port of the chromatograph；

Drive gas and pressure: dry air (or other inert gas), pressure: 0.4MPa；

Auxiliary air flow rate: 50 ml/min -200 ml/min；

Working voltage: DC24V power supply；

Internal piping: 1/8 stainless steel pipe；

Connector: 1/8 card sleeve；

Dimensions: 420mm * 400mm * 480mm；

Weight: Approximately 5kg.