Laboratory gradient furnace SP

Conduct kiln tests on some samples under various temperature conditions together.

• Stainless steel shell, L-shaped steel structure
• A lid insulated by mineral particles and hung open
• Insulation formed by mineral particle moss
• The heating device is placed in the groove on the side of the furnace
• Circuit breaker behind the furnace
• S-type thermocouple
• All electric heating elements are installed at the bottom of the furnace
• The controller industry allows saving 30 control programs in internal controller memory, each consisting of 15 steps. Due to the installed real-time clock, operators can start selecting programs on pre-set dates and times

• The operation area controlled by the industrial controller, with the following four areas measured by thermocouples and connected to display CAL

• Efficient heating speed
• Top insulation material (low power consumption, with the possibility of quickly starting at the required temperature)
• Programmable temperature controller
• Solid state relay (smooth and silent operation, minimal interference from surrounding mechanical devices)
• Perfect workshop operation, hardware, and safety equipment in use

• Multi area measuring device Ht 100 (possibility of scanning up to 10 locations)
• Interface R 232/485
• Entry of monitoring software and temperature cycle