A brief introduction to the LIFS-976 series laser-induced fluorescence spectrometer, mainly composed of three components: 976nm multimode fiber coupled laser, 976nm fiber probe, and miniature fiber spectrometer. Compared to traditional fluorescence spectrometers, the 976nm laser-induced fluorescence spectrometer has the characteristics of good reproducibility, fast measurement speed, and high sensitivity.

The LIFS-976 series laser-induced fluorescence spectrometer consists of three main components: a 976nm multimode fiber coupled laser, a 976nm fiber probe, and a miniature fiber spectrometer. Compared to traditional fluorescence spectrometers, the 976nm laser-induced fluorescence spectrometer has the characteristics of good reproducibility, fast measurement speed, and high sensitivity.

The system adopts TEC cooling control, ensuring more stable operation and superior performance of the laser light source. The detection sample can be solid, powder, molten sheet, liquid, etc. The LIFS-976 series laser-induced fluorescence spectrometer detection system has the characteristics of good reproducibility, fast measurement speed, and high sensitivity. Suitable for various industrial and scientific research users. The main application areas can be divided into: biomedicine, gemstone identification, nanomaterials, agricultural production, petrochemicals, etc.

Semiconductor 976nm laser, small size, low power consumption

High spatial resolution: measurement results can reach the micrometer level

Stability reaches 3% RMS

◆ 10000.00 hour lifespan

◆ Millisecond level spectral acquisition speed

20mW-500mW, adjustable laser power, higher utilization efficiency

Solid, liquid, and powder can all be detected

◆ Confocal design, OD3 filtering effect

Operation steps

1. Install on the computerUspectralPro software, during the software installation process, will automatically install the spectrometer driver program;

2. Connect the spectrometer to the power supply,Turn on the power switch on the backplane;

3. UseConnect the spectrometer to the computer using a USB data cable;

4. Open itUspectralPro software for laser and spectrometer parameter control (see UspectralPro software user manual for detailed instructions);

5. After installing the required sampling accessories on the probe, align the probe with the sample and operate itUspectralPro software collects data from the samples to be tested;

After collecting the data, it can be usedUspectralPro software is used for data processing.

application area

1. Raman detection

2. Drug stimulation

3. Medical analysis

4. Material analysis

5. Optical experiment teaching

6. Special scientific research