LED type illuminated incubator

NegotiableUpdate on 10/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

LED type light cultivation box microcomputer fully automatic control, touch switch, easy to operate;

Product Details

　　LED type illuminated incubatorMicrocomputer fully automatic control, touch switch, easy to operate; Programmable multi-stage control mode, temperature, humidity, light intensity, and time can be set separately during both day and night. Air duct ventilation, with soft air velocity and uniform temperature in the working room; Hollow reflective tempered laminated glass, with good insulation performance and beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.

　　Instructions for using LED type light incubator

1. Connect the power supply, turn on the power switch, and the whole machine will be powered on. The power indicator light inside the switch will light up.

2. Please refer to the manual of the intelligent digital temperature controller for temperature control settings.

3. If lighting is required, turn on the lighting switch.

4. This type of incubator has breakpoint protection function and a delay function of about one and a half minutes. It takes about one and a half minutes to restart after the compressor is stopped.

　　Maintenance and cultivation of LED type light incubator

1. The outer shell of the incubator should be reliably grounded.

2. The incubator should be placed in a cool, dry, well ventilated place away from heat sources and direct sunlight. Place it steadily to prevent vibration and noise.

3. To ensure effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a 50mm gap on the side of the box, and at least 300mm of space at the top of the box.

4. When handling, repairing, and maintaining the incubator, collision, shaking, and vibration should be avoided; The maximum inclination is less than 45 degrees.

5. The instrument suddenly doesn't work. Please check if the fuse tube (behind the box) is burnt out and check the power supply.

6. When cooling the incubator, it is not advisable to make the temperature difference between the incubator and the ambient temperature greater than 25 degrees.

　　Technical parameters of LED type light incubator

1. Main model: GDN-300B-2

2. Temperature control range: 0-50 ℃

3. Dimensions (width * depth * height): 595 * 565 * 1900mm

4. Inner container size (width * depth * height): 515 * 460 * 1320mm

5. Capacity: 300 liters

6. Light source: Top mounted LED lighting panel, vertical lighting.

7. Illuminance: 0-10000LX

8. Number of illumination layers: 2 layers

9. Temperature fluctuation: ± 1.0 ℃ (± 1.5 ℃ below 0 ℃)

10. Illuminance adjustment range: 0-100% Emax stepless dimming

11. Wind direction and speed inside the workspace: Near horizontal 0.1m/s to 0.3m/s