KS30 SF6 comprehensive tester

This product adopts modular design and can be combined into the following types according to requirements:
1. 4 decomposition products KS30-4
2. Purity+decomposition products (discontinued)
3. Micro water+decomposition product KS30-S+4
4. Purity+Micro water KS30-C+S
5. Comprehensive tester: Micro water+Purity+Decomposition product KS30

technical indicators

SF6humidity
Measurement range: Dew point -80~+20 ℃ (supports ppmv, etc.)
Dew point accuracy: ± 1 ℃ (when the dew point temperature is below 0 ℃, the sensor output is frost point)
Response time: 63% [90%]
+20→-20 ℃ Td 5s[45s]
-20→-60 ℃ Td 10s[240s]
Resolution: Dew point 0.1 ℃ or 0.1ppm
Gas flow rate0.25～0.35L/min
Electronic mass flowmeter
Sample gas flow rate has no effect
Pressure measurement: 0-1.0MPa
Probe protection: Stainless steel sintered filter screen

SF6Purity:
Range: 0-100% SF6;
Accuracy and repeatability: ± 0.1%, independent of flow rate;
Response time: 30 seconds


SF₆Decomposition products:
H₂S: 0-200ppm accuracy: ≤± 0.5%;
SO₂: 0-1000ppm accuracy: ≤± 0.5%;
CO: 0～1000ppm 精度：≤ ±0.5%
HF: 0-10ppm Accuracy: ≤± 0.5%
Sensitivity: 0.1 ppm
Repeatability: ≤± 1%

For special decomposition products exceeding the above range, please consult the company's R&D department: transfer to 1001

通用部分：
Working voltage: 220VAC ± 10% 50Hz, AC/DC dual-use, overcharge protection,
Continuous work for no less than 5 hours
Storage temperature level: -40~+70 ℃
Output interface: USB 1.1 specification
Data storage: capable of storing 200 records
Operating environment: Temperature: -30 to+60 ℃
Pressure: 0-20bar
Sample gas flow rate: No impact
Other configurations: Standard version management software, including report printing, commonly used humidity conversion toolkit
Size: 132 × 283 × 308