JS Fiber Optic Mount Series

This product is suitable for optical fibers with SMA905 and SMA906 connectors, as well as FC connectors.

It is recommended to install it on the instrument. The middle hole diameter of 1A and 1B connectors is 4mm, and the middle hole diameter of 1C/2A and 2B connectors is 3.18mm. After tightening the fiber optic cable, the 1A/1B/1C plug will be exposed by about 2.2mm, while the 2A/2B plug will not be exposed. If installed on other devices, please refer to the following diagram to process the matching shell.

JS-SMA905-1A
Product diagram	introduce		Installation diagram	drawing
	The material of this product is copper gold-plated, with a middle aperture of 4.0mm. After connecting the SMA905 connector, the plug core will be exposed by 2.2mm.

JS-SMA905-1B
Product diagram	introduce		Installation diagram	drawing
	The material of this product is copper nickel plated, with a middle hole diameter of 4.0mm. After connecting the SMA905 connector, the plug core will be exposed by 2.2mm.

JS-SMA905-1C
Product diagram	introduce		Installation diagram	drawing
	The material of this product is copper nickel plated, with a middle hole diameter of 3.18mm. After connecting the SMA905 connector, the plug core will be exposed by 2.2mm.

JS-SMA905-1D
Product diagram	introduce		Installation diagram	drawing
	The material of this product is copper nickel plating, with a middle aperture of 3.18mm. After connecting the SMA905 connector, the plug is almost flush with the bottom surface.

JS-SMA905-2A
Product diagram	introduce		Installation diagram	drawing
	The material of this product is aluminum alloy anodized silver white, with a middle aperture of 3.18mm. After connecting the SMA905 connector, the plug will not be exposed.

JS-SMA905-2B
Product diagram	introduce		Installation diagram	drawing
	The material of this product is anodized black aluminum alloy, with a middle aperture of 3.18mm. After connecting the SMA905 connector, the plug will not be exposed.

JS-FC-1
Product diagram	introduce		Installation diagram	drawing
	The material of this product is copper nickel plating, with a middle aperture of 2.5mm. After connecting the FC connector, the plug is basically flush with the bottom surface. Please refer to the figure on the right for specific dimensions.

FL74Flange plate			FLCSMAFlange plate
FL74	Installation diagram	Product Connection	FLCSMA	Installation diagram	Product Connection
		FL74 flange OSB optical lifting support rod			FLCSMA flange OSB optical lifting support rod
FS-74Bracket			FS-SMABracket
FS-74	Installation diagram	Product Connection	FS-SMA	Installation diagram	Product Connection
		FS-74 bracket SMA905 quartz fiber optic connector			FS-SMA bracket SMA905 quartz fiber optic connector