Intrinsic safety ultrasonic level gauge US06

NegotiableUpdate on 07/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

FLOOLINE ECHOTOUCH ® The US06 intrinsic safety reflective ultrasonic level gauge achieves continuous level measurement with a range of up to 19.6 '(6m) through continuous 4-20 mA analog signals, and is set through its integrated button display module, WebCal software, or HART. These sensors are suitable for use in liquid collecting tanks containing media that are free of foam or prone to generating vapor (such as chemicals, water, waste water and oil). Typical application scenarios include collection tanks, daily supply tanks, neutralization tanks, clarification tanks, and wastewater tanks.

Product Details

Characteristics of the US06 intrinsically safe ultrasonic level gauge:

● Provide measurement ranges of 6m and 12m
Reliable reflection and condensation technology measures
Aluminum shell corrosion-resistant PVDF transducer
7.6cm beamwidth applied in limited space
LCD display shows horizontal, inch, meter or percentage span
● HART communication in point-to-point and multi drop modes
● Fault safety diagnosis and selectable fault safety signal output
● Configure display through buttons or WebCal software
● Automatic temperature compensation -40 º C... 80 º C

Technical parameters of intrinsically safe ultrasonic level gauge US06:
Range: 20cm... 6m
Accuracy: ± 0.2% up and down
Resolution: 2mm
Dead zone: 20.3cm
Wave speed width: 7.6cm
Display type: 6-digit LCD
Supply voltage: 14-28 VDC
Loop resistance: 500 Ω @ 24 VDC
Signal output: 4-20mA, two-wire, HART 7
Process temperature: -40 º C... 80 º C
Environmental temperature: -40 º C... 80 º C
Pressure: 2 bar
Shell rating: IP66
Shell material: Aluminum
Shell ventilation opening: water tight membrane
Electrical interface: 1/2 "NPT
Sensor type: Reflective
Sensor pad: PVDF (polyvinylidene fluoride)
Installation interface: 2 "NPT or 2" G
Installation gasket: N/a or Viton?
Level: Intrinsic Safety
Explosion proof standard: Class I, Zone 1, Groups A, B, C, and D; Second level E, F, and G groups; Level 3; Level 1 Zone 0 IIC Group, Zone 20 IIC Group
Explosion proof certification: II 1G, EEx ia IIC Gc
Certification: CE