Intelligent high-power electric vehicle charging socket

NegotiableUpdate on 08/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

✔ Automatic detection of tram power, with high power charging more and low power charging less, fair and reasonable;

Product Details

Product Name:intelligentHigh power 5000W electric vehicle charging socket
1、 Main functions:
✔ Swipe the card and there will be no power without swiping the card; Using encrypted cards, swipe the card to deduct fees, settle as much as needed, and any unused money from the deducted fees can be swiped and retrieved back into the card;
✔ Countdown of charging time, tripping when the set time is reached to prevent overcharging;
✔ Detected full automatic power-off;
✔ Immediately disconnect the power after unplugging, and then swipe the card again;
✔ Immediately cut off power when the set load value is exceeded to prevent high-power loads from damaging the circuit;
✔ Automatic detection of tram power, with high power charging more and low power charging less, fair and reasonable;
✔ Built in insurance to prevent short circuits, immediately cut off the power supply in case of a short circuit;
✔ Power outage memory, power on recharge;
2、 Product features of Wangyue Electric electric vehicle charging station:
✔ Rain proof design, the product itself is not afraid of rain;
✔ The shell is made of high-quality flame-retardant materials, which are self flame-retardant and prevent fires;
✔ By using the query card, you can check the cumulative amount and electricity consumption on each socket; Facilitating monthly property statistics;
✔ Anti leakage and anti electric shock functions:
✔ When this socket is not in use, the socket is not energized and there is no voltage or current output
✔ Adopting thickened all copper plugs, combined with socket engagement technology, it has strong elasticity, reliable quality, and will not have poor plug contact;
3、 Installation and use:
✔ Independent installation, no need for a host, each can use electricity by swiping a card; Avoid multiple people queuing up to swipe their cards;
✔ Provide a computer version of the electricity sales management card reader software or a handheld recharge management machine for IC card account opening and recharging, choose one of the two;
✔ Install a leakage protection circuit breaker every 20 or 30 sockets, using a 4-peter copper core wire as the bus; The socket comes with two wires when it leaves the factory, which are respectively connected to the live wire and neutral wire of the main conductor. Choose to install on walls or columns suitable for charging electric vehicles in carports and parking lots, and drill holes and pins on the walls according to the spacing of the four holes on the back of the socket. Then fix them separately with four ST3.9 × 20 quenched self tapping screws. If installed outdoors, a rain shelter should be provided. According to the length of the cable for a typical electric vehicle charger, the installation height should be about 130 centimeters above the ground, and the distance between sockets should be maintained at 70-100 centimeters.
All cables should be threaded inside PVC pipes and kept away from sources of fire, fire hoses, radiators, etc.
4、 Technical parameters:
Input power supply: AC 220V, 50Hz;
Output power: Maximum output power of 5000W;