High voltage stepper motor driver MA2208

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MA2208 series two-phase stepper motor driver is a cost-effective segmented driver designed based on PID current control algorithm. It has superior performance, high-speed high torque output, low noise, low vibration, and low heat generation, making it particularly suitable for OEM customers' large-scale applications. The driver can select the operating current and subdivision through a dip switch, with 16 types of subdivision and 16 types of current to choose from. It has overvoltage, undervoltage, phase current, and bus current overcurrent protection, and the input and output control signals are all optically isolated. L Power supply: 80-265VAC l Output current: 4-digit switch setting, 16 options, maximum 8 amperes (peak) l Current control: advanced digital PID current control, high-speed high torque output l Subdivision settings: dip switch setting, 16 options: 200, 400, 800, 1600, 3200, 6400, 1280025600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 steps/rev l Speed range: Choose the appropriate stepper motor, up to 3000rpm

Product Details

■stepping motor driverMA2208characteristic

Power supply:80-265VAC

Output current:4Position switch setting, sixteenChoose from various options,8maximum

Ampere (peak)Current control: advanced digital technologyPID

Current control, high-speed and high torque outputL subdivision setting: dip switch setting, sixteenOptions: 200, 400, 800,1600, 3200, 6400, 12800,25600, 1000,2000, 4000, 5000, 8000, 10000, 20000, 25000

pace/

change

Speed range: Choose a suitable stepper motor, up to a maximum of

3000rpm

Resonance suppression: Automatically calculate resonance points to suppress mid frequency vibrations1System self-test: The driver automatically detects motor parameters during power on initialization and optimizes the motor current algorithm and anti resonance electronic damping coefficient based on thisL Subdivision interpolation: Selecting the dip switch can reduce the vibration of motor operation and improve the smoothness of operationControl method:2Position switch setting, pulse direction

/Dual pulse mode inputOptionsInput filtering:2 MHz

perhaps2150 KHz1Digital signal filterIdle current:Select the dip switch, after the motor stops runningThe current will automatically decrease to the rated current in seconds

25%,50%,75%perhaps90%Product self inspection: selection of dip switch,

Motor to

1rpsPerform two cycles of forward and reverse reciprocating motion at a certain speedLoad inertia: Depending on the application scenario,By selecting high or low load inertia through the dip switch, the motor can achieve smoother operating performance

1. ■

2. stepping motor driver

MA2208performance index