High strength bolt anti slip coefficient tester

1High strength bolt anti slip coefficient testerbrief introduction

This detector can detect high-strength bolt connections with large hexagonal heads（M12、M16、M20、M22、M24、M27、M30）Twisted shear type high-strength bolt connection pair（Anti slip coefficient testing of M16, M20, M24, M27 slip plates.There are four physical channels and a total of 24 logical channels in six groups.

When the axial force reaches the standard specified value, the monitoring data and standard deviation will be automatically recorded; It can store tens of thousands of sets of data for a long time and can read and print them at any time. It has parameter backup and recovery functions, automatic calibration function, and peak holding monitoring set according to anti slip detection requirements.

IIHigh strength bolt anti slip coefficient testerSpecification

1.Axial force measurement range 30~400 (KN)

2. Resolution±0.1 (KN)±1.0（KN）

3. Indication error±1% (KN)±1%（KN）

4. Display mode: Touch screen display

5. Peak axial force maintenance

6. It can store tens of thousands of sets of data, can be stored for 10 years, and can be read and written freely.

The stored contents of each experimental data group include the test date, test number, model of high-strength bolt, and the standard axial force detected. 7 sensors

120KN 4 suitable for M16

4 units of 180KN are suitable for M20

210KN 4 pieces suitable for M22

240KN 4 suitable for M24

320KN 4 suitable for M27

400KN 4 suitable for M30

IIIinstall

1. Open the wooden crate

2. Check if the accessories of the detector are complete according to the packing list in the instrument box.

3. Three core power cord.

4. Connect the axial force sensor with a sensor cable.

5. Installation test piece:

Unscrew the four 6mm screws on the back and connect them to the universal bracket. After tightening the screws, the installation is complete.