Hand lift 4-inch gasoline motor pump EYC100QE-65 * 2 vacuum pump water intake

Hand lift 4-inch gasoline motor pump EYC100QE-65 * 2 vacuum pump water intake

Characteristics of 4-inch gasoline self-priming pump:

1. Strong power: The gasoline engine set has an overall crankshaft with high stiffness, high strength, and high torque transmission efficiency.

2. Advanced technology: adopting customized technology and gantry type body, sliding bearings, plate fin type machine cooler, overhead heat exchanger, rotary oil filter and dual cooling system.

3. Good performance: The smoke and noise indicators meet the national first-class standards, and the fuel consumption is 2.1g/kW. h lower than the national first-class standards.

4. High degree of automation: It has automatic, manual, and fault self checking functions, monitors the working status throughout the process, can restore the automatic restart function after failure to start, automatically pre lubricate and pre heat, making equipment startup safer and more reliable; It has remote control and remote transmission functions in the central control room, and can also have fieldbus connection (optional function).

Scope of use: flood prevention and drought resistance, road drainage, garden maintenance, greening engineering, irrigation engineering, marine pumping, factory backup, warehouse drainage, etc;

The purpose of a water pump is to transport water from one place to another, or to increase pressure and convert kinetic mechanical energy into liquid energy.

Working principle of water pump: After turning on the water pump, the impeller rotates at high speed inside the pump body (the pump body should be filled with liquid before turning on the water pump). The liquid in the pump body rotates together with the impeller, and under the action of centrifugal force, the liquid is thrown out by the impeller at the outlet. The speed of the thrown out liquid gradually slows down in the diffusion chamber of the pump body. After the liquid is thrown out, a vacuum low-pressure zone is formed at the center of the impeller. The liquid in the liquid pool flows into the water pump through the suction pipe under the action of external atmospheric pressure. The volume of the diffusion chamber of the pump body is constant. As the amount of liquid thrown out increases, the pressure gradually increases and is then discharged from the outlet of the water pump. The liquid is continuously sucked up from the pool and then continuously discharged from the pump outlet

Hand lift 4-inch gasoline motor pump EYC100QE-65 * 2 vacuum pump water intake