HZQ-Q Full Temperature Constant Temperature Oscillator

1Full temperature constant temperature oscillatorsummary:

Full temperature constant temperature oscillator(Full temperature air shaker) is a type of（5～50A high-precision biochemical instrument that combines a temperature controlled incubator (℃) with a large capacity oscillator. The incubator is equipped with a circulating fan to force air circulation, resulting in a more uniform temperature distribution and better experimental results. It has two specifications: light and no light. This intelligent full temperature oscillator is widely used in laboratories of biological genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, aquaculture and other departments.

IIFull temperature constant temperature oscillatorcharacteristic:

Imported stainless steel plate is used in the tank, which is resistant to aging and corrosion. The frozen air bath full temperature shaker adopts high-performance microcontroller control, touch buttons, and a large window blue screen LCD display panel, which can simultaneously display clock, temperature, and speed; Adopting a fully Chinese human-machine dialogue format, online menu inquiry, intuitive observation, and simple operation.

IIIFull temperature constant temperature oscillatorMain technical performance:

4Full temperature constant temperature oscillatorinstructions:

1Using at medium speed within the speed range can extend the lifespan of the instrument.

2The frozen air bath full temperature shaker should be placed on a flat ground, and the environment should be kept clean, tidy, ventilated, and dry.

3Before using the instrument, place the speed control knob in the small position and turn off the "oscillation switch".

4Packing culture test bottles: ① Pay attention to uniform distribution② Pay attention to sealing the bottle mouth. ③ Prevent condensed water droplets from dripping into the test bottle.

5Connect the external power supply, place the power switch in the "on" position, and the indicator light will turn on.

6Temperature control:

① Turn on the power and the self-test will end in about one minute. If displayed“000”This indicates that the sensor is open or the input signal exceeds the measurement range.

② PressSETThe key can set the temperature, pressSETPress the key to flash the data in the lower row of the convergence tube, indicating that the instrument has entered the temperature setting state,Press △The key setting value increases,Press ▽The key setting value decreases, press it againSETThe key instrument panel returns to normal working state and the temperature setting is completed.

③ When confirming that the value displayed on the instrument is not the correct measurement value, the displayed value can be corrected. pressSETkey3 Enter the instrument panel in seconds Inner menu, select parametersSCCollaboration afterwards△perhaps▽The key can modify this parameter. The range of correction for sensor errors is 50arrive

－50After the correction is completed, press againSETkey3Exit in seconds. The correction value of the instrument when it leaves the factory is0When using, it is necessary to prevent correcting instruments that display correctly to incorrect ones.

④ The self-tuning function of the instrument: This product can adapt to the vast majority of control systems, and can only start self-tuning when the control effect is particularly unsatisfactorySETkey3Quickly enter the inner menu of the instrument panel and select the parametersAtCollaboration afterwards△perhaps▽Press the key to enable self-tuning, at this pointAtThe indicator light starts flashing and the instrument enters the automatic parameter setting working state. The instrument controls the heating system to fluctuate twice near the set pointAtSelf setting ends when the light goes out, newP I DThe parameters are locked in the chip.

7Turn on the oscillation switch, the indicator light will turn on, slowly adjust the speed control knob to the desired speed.

8After completing the work, set the temperature control button and speed control knob to low values and cut off the power.

5Full temperature constant temperature oscillatorMaintenance and upkeep:

1Proper use and maintenance of the instrument can prolong its service life by keeping it in good working condition.

2The instrument should have good grounding to prevent accidents. It is strictly prohibited for various solutions to enter the host room to avoid damaging the host.

3The bearings of the transmission part have been filled with an appropriate amount of lubricating grease before leaving the factory,Full temperature oscillatorDuring continuous operation, lubricating grease should be added every six months, with a filling amount of approximately half of the bearing space1/3.