HY-2, HY-2A Speed Regulating Multipurpose Oscillators

Variable speed multipurpose oscillatorIt is a biochemical instrument for cultivating and preparing biological samples, and is an indispensable laboratory equipment for scientific research, education, and production departments such as plants, organisms, microorganisms, biological products, genetics, viruses, medicine, and environmental protection. The speed regulating multi-purpose oscillator is a floor standing type with a low center of gravity, which is stable and reliable in continuous reciprocating oscillation operation,
The main characteristics of the speed regulating multi-purpose oscillator are:
① The universal spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments
② Equipped with mechanical timing
③ Stepless speed regulation, easy and safe operation.

HY-2 Speed Regulating Multipurpose Oscillator

One:Variable speed multipurpose oscillatorCharacteristics and USES

The HY-2 speed adjustable multipurpose oscillator can simultaneously perform analysis on test tubes, separating funnels, triangular flasks, etc., and is equipped with a timing device for smooth and noise free operation, making it suitable for various universities and colleges Research environment protection hygiene. Epidemic prevention Oil Metallurgy Essential laboratory tools for chemical engineering.

Secondly:Variable speed multipurpose oscillatorTechnical Parameter

1.Oscillation frequency: 30-360 times/minute

2.Oscillation amplitude: 20mm

3.Working mode: continuous

4. Power supply: single-phase AC 50HZ, 220V ± 10V

5. Overall power: 150W

6. Timing: 0-120 minutes

7. Load: 20kg

8. Dimensions: 500 × 320 × 240 (mm)

3： Safety Notice for the Use of Speed Regulating Multipurpose Oscillators

Remember to follow the following safety precautions when using this product:

1. Read all user manuals.

2. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine and have good grounding measures.

When replacing the fuse, the plug should be unplugged from the socket.

After the motor or electrical equipment malfunctions, it should be repaired by professionals. Using non recommended accessories can cause certain quality problems.

1. When used in an environment with children, close attention should be paid.
2. During use, it is strictly prohibited to insert fingers into the gaps of movement.
3. The instrument is strictly prohibited from moving during movement.
4. The working platform of the instrument should not be too smooth (such as ceramic tiles, etc.).
5. The instrument should be supervised by someone when used at heights.

When cleaning the machine, the power should be unplugged first.

4： Instructions for use

1. Selecting the speed range for use can extend the lifespan of the instrument.

2. The instrument should be placed on a stable ground, with a clean and tidy environment, moderate temperature, and good ventilation.

Before using the instrument, place the speed control knob in the small position.

4. In order to ensure the smooth operation of the instrument and avoid significant vibration, all test bottle positions should be filled when bottling, and the culture medium in each bottle should be roughly equal. If there are not enough culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.

1. Select the timer and adjust the timer knob to the "timer" or "normally open" position.
2. Connect the external power supply, turn the power switch to the "on" position, and the indicator light will turn on. Slowly adjust the speed control knob to the desired speed.
3. Before stopping the machine, the speed control knob must be placed in the small position, the power switch must be turned off, and the power supply must be cut off.

5： Maintenance and upkeep

1. Proper use and maintenance of instruments can prolong their service life by keeping them in good working condition.
2. During continuous operation, the instrument should be regularly inspected every three months to check for water droplets, dirt, and other debris falling into the motor and control components, as well as to inspect fuses, control components, and fastening screws.
3. The bearings of the rotating part have been filled with an appropriate amount of lubricating grease (Calcium Nanobase No.1) before leaving the factory. During continuous operation of the instrument, lubricating grease should be added every six months, with a filling amount of about one-third of the bearing space.
4. After long-term use, natural wear and tear of the instrument is a normal phenomenon. If abnormal noise is found in the motor, worn bearings in the transmission part, loose or cracked belts, or electronic control components fail after one year of use, our company will continue to provide services and assist in handling them.