HV-1 microhardness tester

NegotiableUpdate on 03/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product introduction: HV-1 microhardness tester is a basic type of microhardness tester. The machine adopts an LCD display screen, and the hardness scale HV or HK test force and holding time can be selected through the operation panel. The brightness of the light source can be infinitely adjusted. The D1 and D2 values measured by the eyepiece can be adjusted during operation

Product Details

Product Introduction:

HV-1Microhardness tester is a basic type of microhardness tester.

The machine adopts an LCD display screen, and the hardness scale HV or HK test force and holding time can be selected through the operation panel.

The brightness of the light source can be infinitely adjusted.

When operating, the D1 and D2 values measured by the eyepiece can be directly input, and the hardness value will be displayed directly on the LCD screen.

Technical Parameter:

model	HV-1
Experimental force	10gf (0.098N), 25gf (0.245N), 50gf (0.49N), 100gf (0.98N), 200gf (1.96N), 300gf (2.94N), 500gf (4.9N), 1kgf (9.8N)
Compliant with standards	GB/T4340，ASTM E92
measurement resolution	0.5µm
data output	LCD display readout
Exchange Scales	Roche, Bruch
Hardness testing range	8~2900HV
Test force application method	Automatic (loading, holding, unloading)
Test microscope magnification	400X (testing), 100X (observation)
Test force holding time	0-60s
Maximum allowable specimen height	85mm
Distance from head to machine wall	95mm
X-Y test bench	Size: 100 * 100mm Maximum movement: 25 * 25mm
size	480240580mm
weight	About 30kg
power supply	AC220V+5%，50-60Hz

Standard accessory:

name	quantity	name	quantity
Weight axis	1 piece	weight	6 of them
10X Test Eyepiece	1 piece	Microhardness block (high block, low block)	1 piece each
Cross test bench	1 piece	Horizontal adjustment base	4 pieces
Small level instrument	1 piece	Backup fuse (2A)	2 pieces
power line	1 piece	instructions	1 copy
Product qualification certificate, warranty card	1 copy

Optional accessories:

Fine wire clamping table	1 piece	Flat mouth clamping table	1 piece
Thin film clamping table	1 piece	Vickers measurement software	1 set