Fully automatic plastic melt index tester (GT-7200-MIA)

NegotiableUpdate on 03/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Adopting a dual stage heater to improve the temperature stability of the equipment, each stage is equipped with an independent temperature sensor, allowing the temperature of the heating material cylinder to be controlled within an accuracy of 0.1 ℃, ensuring the accuracy of the testing conditions. The electric loading weight device can automatically load the required load for testing through the delicate combination of screws and cylinders.

Product Details

1、 Product Introduction

Adopting a dual stage heater to improve the temperature stability of the equipment, each stage is equipped with an independent temperature sensor, allowing the temperature of the heating material cylinder to be controlled within an accuracy of 0.1 ℃, ensuring the accuracy of the testing conditions.
The electric loading weight device can automatically load the required load for testing through the delicate combination of screws and cylinders.

Key Features:
7-inch color touch screen display, PLC+RKC module control
The upper and lower molds self adjust PID temperature control
5-segment interval linear correction
Quick mold removal
Mobile heating material cylinder
Automatic weight loading device
Switching between A method, B method, and density measurement at will
USB interface, fast data download and output, and software update function

2、 Technical parameters

Product specifications: GB/T 3682, ASTM D3364, ASTM D1238, ISO 1133, JIS K7210

temperature range	Room temperature~450 ℃
Control method	7-inch color touch screen, PLC+RKC temperature control module
temperature accuracy	±0.1℃
test method	Method A: 0.15~50g/10min, Method B: 0.5~100g/10min Switch freely with density measurement
Inner diameter of cylindrical barrel	Φ（9.5504 ±0.0076）mm
Piston rod size	The length of the piston head is 6.35 ± 0.13mm, and the outer diameter of the piston head is 9.4742 ± 0.0076mm Piston rod diameter 8.89 ± 0.025mm
Fine pore mold size	Outer diameter (9.5 ± 0.02) mm; aperture (2.0955 ± 0.0051) mm Length (8.00 ± 0.025) mm
Measurement distance of piston movement stroke	25.4mm
Sampling setting	1.0~25.4mm can be set arbitrarily
warm-up time	0-60min arbitrary setting
Data access	Standard USB port (Printing function: optional)
Load loading method	Automatically load after default
Load capacity	Standard load: 325g (i.e. weight pressure rod) Choose Load: 1000g, 1200g, 2160g, 3800g, 5000g, 10000g, 12500g, 21600g (Combination selection)
Volume (approximately)	65cm × 50cm ×110cm（W×D×H）
Weight (approximately)	130 kg
power supply	AC 220V ± 5% 50-60Hz Fuses 6A approximately 1300W

If there are any changes or variations to the product specifications and content, please refer to our actual quotation information.