Flowline tuning fork level switch LZ12

NegotiableUpdate on 05/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The vibration frequency of the FLOOLINE tuning fork level switch is 400Hz. When the switch enters a liquid or suspended medium, the frequency of the tuning fork level switch will change. When the measured frequency change reaches a certain level, the relay change state indicates the condition of the medium. The tuning fork level switch is mainly used for industrial liquids such as sewage with layers and impurities, as well as hydrochloric acid and sodium hydroxide

Product Details

Flowline tuning fork level switchProduct features:
Can be applied to non hazardous and lightweight solids, including particles and powders
Relay FET switch output can be connected to PLC, SCADA or alarm
The plastic structure of PP/Ryton material makes the tuning fork level switch corrosion-resistant
IP68 or NEMA6 probes and cables can be used for underwater operations in tanks or tanks

The parameters of the FLOW LINE tuning fork level switch are as follows:

Accuracy: ± 1mm in water
Repeatability: ± 0.5mm in water
Frequency: 400Hz
Power supply: 12-30VDC
Power consumption: not immersed in liquid state: 5mA
Immersion in liquid state: 19mA
Contact type: (1) SPST relay
Contact capacitance: 60VA, maximum 1A
Contact output: normally open (NO) or normally closed (NC) optional
Relay: 1A (250VAC)
Switching output: NO or NC
Temperature resistance: -40~80 ℃
Pressure resistance: 10 bar (at 25 ℃)
Probe material: Ryton (glass filled)
Protection level: IP68
Installation thread: 3/4 'NPT&CSP
Cable specification: 3m long, # 24 American 5-core shielded, 1124AWG, PP insulated outer sheath
Explosion proof: Non explosion proof