Flashing signal alarm XXS-01B, XXS-02B type

XXS-01B and XXS-02B flashing signal alarms are generally installed on the dashboard in the control room. Its input signal is of the electric contact type, which can be used in conjunction with various electric contact type control and detection instruments to indicate that the parameters in the production process exceed the limit values and attract the attention of operators; To ensure production safety, due to the use of CMOS circuits, it is not suitable to use in places with corrosive gases and explosion hazards.

Power supply voltage AC: 220V ± 10% V, frequency 50 ± 5% Hz

Environmental temperature:+5 to+50%

The maximum line resistance between the contact element and the alarm should not exceed 20 Ω

Input alarm signal: contact type, this contact should be used separately and should not be combined with other circuits.

Sound alarm: AC 200V, 8W electric alarm or buzzer (to be provided by the user)

Alarm power consumption: 14W (22W for 02B, excluding bell power)

Weight: 4.5 kg

Dimensions: 160 × 80 × 210 (mm)

Hole size: 152 × 76 (mm)