FLOW LINE Contact Ultrasonic Liquid Level Switch LU10

NegotiableUpdate on 05/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The piezoelectric crystal of the FLOOLINE LU10 ultrasonic level switch is a fork shaped probe, and the middle of this fork shaped probe is separated by air. A crystal with a vibration frequency of 1.5MHz can transmit sound signals to the air gap. When the probe is immersed in liquid, the crystal couples with sound waves, and the switch FET of the ultrasonic level gauge will change state. This product can be used for measuring the vast majority of liquids, including liquids with mild stratification, xylene, gasoline, diesel, and other liquids with certain hazards.

Product Details

FLOWLINE LU10Ultrasonic level switchProduct features:
● Intrinsic safety explosion-proof type, capable of measuring various liquids
● Material and length are optional, PP/PFA material is resistant to acid and alkali corrosion.
IP68 probes and cables can operate underwater
● Relay output and can be connected to PLC or alarm

The parameters of the LU10 ultrasonic level switch are as follows:

Accuracy: 1mm in water
Repeatability: 0 in water 5mm
Frequency: 1.5MHz
Power supply: 12-36VDC
Power consumption: not immersed in liquid state: 5mA
Immersion in liquid state: 19mA
Relay: 1A (250VAC)
Switching output: NO or NC
Temperature resistance: -40-60 ℃
Pressure resistance: 10 bar (25 ℃)
Probe material: PP/PFA Teflon
Protection level: IP68
Installation thread: 3/4 'NPT&CSP
Cable specifications: length 244cm, diameter 2g aug e,
PP or PFA insulation sheath
Explosion proof: Intrinsic safety explosion-proof, EEX IA II C T6